Minolta Magicolor 2300 DL with Vista x64?

> Ask Minolta if they are going to write one. No other one will work.
> --
> Cari (MS-MVP)
> Windows Technologies - Printing & Imaging
> http://www.coribright.com/windows
> ....

I sent an email to Minolta's customer support yesterday. The Vista 32-bit
driver is many months old so it does not look like they are rushing to
support x64. I was hoping the print interface was semi generic/standard. I
was able to get Linux to work with this printer using a driver that was not
specific to the printer model. I will post back if any good nows.

Thanks,
Kent

Kent_Diego;685956 Wrote:
>
> "I found a working Vista x64 Konica Minolta Magicolor 2300DL driver.
> '64bitdrivers.com:: Konica Minolta Magicolor 2300DL for XP x64'
> (http://64bitdrivers.com/driver.php?id=1490)
> 1. Control Panel>Hardware and Sound>Printer>Add Printer
> 2. Select Local Printer not Network Printer!
> 3. Create new port Standard TCP/IP port, port 9100 RAW.
> 4. Select "Have Disk" and browse to driver downloaded from
> 64bitdrivers.com"
>

Even though this is an old post, I've gotta say that these instructions
work GREAT under Windows 7 x64 (a very new situation where they apply).
Yes, the Konica Minolta Magicolor 2300DL for XP x64 drivers will do the
trick (and works quickly!) under Windows 7 x64 -provided- you create the
TCP/IP port as directed here.

Many thanks, and now I can keep my printer!

Jeff


--
jsandytn