 |
|
|
|
Next: msn.com
|
| Author |
Message |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 1) Posted: Sat Aug 04, 2007 11:32 pm
Post subject: Internet connection will not remember my login password
Archived from groups: microsoft>public>windows>vista>general (more info?)
|
|
|
I cannot save my Internet connection password. If I open my Internet
connection manually by clicking on my Speedtouch icon, the only info saved is
my username. The password is blank and I have to re-enter it each time to go
online.
When IE7 launches it attempts to log on but comes up with an "Error 691"
message.
If I open IE7, click on Tools and then Internet Properties I can see the
Speedtouch Connection which I have set as the default. If I then highlight
that and click on Settings, I see under Dial-up settings that my username is
there but the Password is blank. If I enter the password and then click OK
it returns me to the Internet Properties page again. If I then go back
immediately to the Settings button for Speedtouch the Password box is again
empty, i.e. the system has not remembered it.
This means that I cannot currently set up the PC to autodial my Internet
connection - I have to go through the process of opening Speedtouch and
manually keying in my password each time I want to log on.
Please could you give me some advice on where, if at all, I'm going wrong?
My PC is protected by McAfee and I have Windows Firewall enabled.
Many thanks
Stuart |
|
| Back to top |
|
 | |
External
Since: Jun 29, 2007
Posts: 1004
|
(Msg. 2) Posted: Sat Aug 04, 2007 11:46 pm
Post subject: RE: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Have you tried redoing the internet connection setup from the start?
You might have tried this: open IE7> File>Open>in the window that pops up
type the IP 10.1.1.1 and that opens up your speed touch modem. Check there
to see if your username and password is saved in the modem; it should be.
"Stuart" wrote:
> I cannot save my Internet connection password. If I open my Internet
> connection manually by clicking on my Speedtouch icon, the only info saved is
> my username. The password is blank and I have to re-enter it each time to go
> online.
>
> When IE7 launches it attempts to log on but comes up with an "Error 691"
> message.
>
> If I open IE7, click on Tools and then Internet Properties I can see the
> Speedtouch Connection which I have set as the default. If I then highlight
> that and click on Settings, I see under Dial-up settings that my username is
> there but the Password is blank. If I enter the password and then click OK
> it returns me to the Internet Properties page again. If I then go back
> immediately to the Settings button for Speedtouch the Password box is again
> empty, i.e. the system has not remembered it.
>
> This means that I cannot currently set up the PC to autodial my Internet
> connection - I have to go through the process of opening Speedtouch and
> manually keying in my password each time I want to log on.
>
> Please could you give me some advice on where, if at all, I'm going wrong?
>
> My PC is protected by McAfee and I have Windows Firewall enabled.
>
> Many thanks
> Stuart |
|
| Back to top |
|
| |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 3) Posted: Sun Aug 05, 2007 12:02 am
Post subject: RE: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hi Mick
Thanks for responding to my question so quickly. While online I've done as
you suggested and opened IE7, clicked on "File" in the menu bar, clicked on
"Open" and then typed "10.1.1.1" into the address box, all I get is an
attempt by IE7 to open a webpage with the address http://10.1.1.1/ so I'm
guessing that's not what you were asking me to do!!
Further explanation would be appreciated.
Many thanks
Stuart
"Mick Murphy" wrote:
> Have you tried redoing the internet connection setup from the start?
>
> You might have tried this: open IE7> File>Open>in the window that pops up
> type the IP 10.1.1.1 and that opens up your speed touch modem. Check there
> to see if your username and password is saved in the modem; it should be.
>
> "Stuart" wrote:
>
> > I cannot save my Internet connection password. If I open my Internet
> > connection manually by clicking on my Speedtouch icon, the only info saved is
> > my username. The password is blank and I have to re-enter it each time to go
> > online.
> >
> > When IE7 launches it attempts to log on but comes up with an "Error 691"
> > message.
> >
> > If I open IE7, click on Tools and then Internet Properties I can see the
> > Speedtouch Connection which I have set as the default. If I then highlight
> > that and click on Settings, I see under Dial-up settings that my username is
> > there but the Password is blank. If I enter the password and then click OK
> > it returns me to the Internet Properties page again. If I then go back
> > immediately to the Settings button for Speedtouch the Password box is again
> > empty, i.e. the system has not remembered it.
> >
> > This means that I cannot currently set up the PC to autodial my Internet
> > connection - I have to go through the process of opening Speedtouch and
> > manually keying in my password each time I want to log on.
> >
> > Please could you give me some advice on where, if at all, I'm going wrong?
> >
> > My PC is protected by McAfee and I have Windows Firewall enabled.
> >
> > Many thanks
> > Stuart |
|
| Back to top |
|
| |
External
Since: Jun 29, 2007
Posts: 1004
|
(Msg. 4) Posted: Sun Aug 05, 2007 12:12 am
Post subject: RE: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Stuart, I meant for you to open IE7 OFFLINE and do it, sorry.
It was a way to get them online
I did it on a speedtouch modem yesterday for a customer.
An ISP once told me the IP for your modem
"Stuart" wrote:
> Hi Mick
>
> Thanks for responding to my question so quickly. While online I've done as
> you suggested and opened IE7, clicked on "File" in the menu bar, clicked on
> "Open" and then typed "10.1.1.1" into the address box, all I get is an
> attempt by IE7 to open a webpage with the address http://10.1.1.1/ so I'm
> guessing that's not what you were asking me to do!!
>
> Further explanation would be appreciated.
>
> Many thanks
> Stuart
>
> "Mick Murphy" wrote:
>
> > Have you tried redoing the internet connection setup from the start?
> >
> > You might have tried this: open IE7> File>Open>in the window that pops up
> > type the IP 10.1.1.1 and that opens up your speed touch modem. Check there
> > to see if your username and password is saved in the modem; it should be.
> >
> > "Stuart" wrote:
> >
> > > I cannot save my Internet connection password. If I open my Internet
> > > connection manually by clicking on my Speedtouch icon, the only info saved is
> > > my username. The password is blank and I have to re-enter it each time to go
> > > online.
> > >
> > > When IE7 launches it attempts to log on but comes up with an "Error 691"
> > > message.
> > >
> > > If I open IE7, click on Tools and then Internet Properties I can see the
> > > Speedtouch Connection which I have set as the default. If I then highlight
> > > that and click on Settings, I see under Dial-up settings that my username is
> > > there but the Password is blank. If I enter the password and then click OK
> > > it returns me to the Internet Properties page again. If I then go back
> > > immediately to the Settings button for Speedtouch the Password box is again
> > > empty, i.e. the system has not remembered it.
> > >
> > > This means that I cannot currently set up the PC to autodial my Internet
> > > connection - I have to go through the process of opening Speedtouch and
> > > manually keying in my password each time I want to log on.
> > >
> > > Please could you give me some advice on where, if at all, I'm going wrong?
> > >
> > > My PC is protected by McAfee and I have Windows Firewall enabled.
> > >
> > > Many thanks
> > > Stuart |
|
| Back to top |
|
| |
External
Since: Sep 30, 2006
Posts: 664
|
(Msg. 5) Posted: Sun Aug 05, 2007 1:15 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Make sure the box about asking for the password is unchecked in the internet
properties page.
"Stuart" <Stuart.TakeThisOut@discussions.microsoft.com> wrote in message
news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
>I cannot save my Internet connection password. If I open my Internet
> connection manually by clicking on my Speedtouch icon, the only info saved
> is
> my username. The password is blank and I have to re-enter it each time to
> go
> online.
>
> When IE7 launches it attempts to log on but comes up with an "Error 691"
> message.
>
> If I open IE7, click on Tools and then Internet Properties I can see the
> Speedtouch Connection which I have set as the default. If I then
> highlight
> that and click on Settings, I see under Dial-up settings that my username
> is
> there but the Password is blank. If I enter the password and then click
> OK
> it returns me to the Internet Properties page again. If I then go back
> immediately to the Settings button for Speedtouch the Password box is
> again
> empty, i.e. the system has not remembered it.
>
> This means that I cannot currently set up the PC to autodial my Internet
> connection - I have to go through the process of opening Speedtouch and
> manually keying in my password each time I want to log on.
>
> Please could you give me some advice on where, if at all, I'm going wrong?
>
> My PC is protected by McAfee and I have Windows Firewall enabled.
>
> Many thanks
> Stuart |
|
| Back to top |
|
| |
External
Since: Jun 23, 2007
Posts: 687
|
(Msg. 6) Posted: Sun Aug 05, 2007 2:52 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The first thing where you went wrong is by having McAfee installed on your system.I would not be surprised if it is the one that is causing this issue. McAfee is not very compatible with Vista
Secondly this issue would be more appropriate to be posted to the IE7 newsgroup where you have many experts on IE7 to help you
http://www.microsoft.com/communities/newsgroups/list/en-us/default.asp...g=micro
--
Peter
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
"Stuart" <Stuart.DeleteThis@discussions.microsoft.com> wrote in message news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
>I cannot save my Internet connection password. If I open my Internet
> connection manually by clicking on my Speedtouch icon, the only info saved is
> my username. The password is blank and I have to re-enter it each time to go
> online.
>
> When IE7 launches it attempts to log on but comes up with an "Error 691"
> message.
>
> If I open IE7, click on Tools and then Internet Properties I can see the
> Speedtouch Connection which I have set as the default. If I then highlight
> that and click on Settings, I see under Dial-up settings that my username is
> there but the Password is blank. If I enter the password and then click OK
> it returns me to the Internet Properties page again. If I then go back
> immediately to the Settings button for Speedtouch the Password box is again
> empty, i.e. the system has not remembered it.
>
> This means that I cannot currently set up the PC to autodial my Internet
> connection - I have to go through the process of opening Speedtouch and
> manually keying in my password each time I want to log on.
>
> Please could you give me some advice on where, if at all, I'm going wrong?
>
> My PC is protected by McAfee and I have Windows Firewall enabled.
>
> Many thanks
> Stuart |
|
| Back to top |
|
| |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 7) Posted: Sun Aug 05, 2007 2:52 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks, Peter - I'll take your advice too, although McAfee c ame with my new
system.
"Peter Foldes" wrote:
> The first thing where you went wrong is by having McAfee installed on your system.I would not be surprised if it is the one that is causing this issue. McAfee is not very compatible with Vista
>
> Secondly this issue would be more appropriate to be posted to the IE7 newsgroup where you have many experts on IE7 to help you
>
> http://www.microsoft.com/communities/newsgroups/list/en-us/default.asp...g=micro
>
> --
> Peter
>
> Please Reply to Newsgroup for the benefit of others
> Requests for assistance by email can not and will not be acknowledged.
>
> "Stuart" <Stuart DeleteThis @discussions.microsoft.com> wrote in message news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
> >I cannot save my Internet connection password. If I open my Internet
> > connection manually by clicking on my Speedtouch icon, the only info saved is
> > my username. The password is blank and I have to re-enter it each time to go
> > online.
> >
> > When IE7 launches it attempts to log on but comes up with an "Error 691"
> > message.
> >
> > If I open IE7, click on Tools and then Internet Properties I can see the
> > Speedtouch Connection which I have set as the default. If I then highlight
> > that and click on Settings, I see under Dial-up settings that my username is
> > there but the Password is blank. If I enter the password and then click OK
> > it returns me to the Internet Properties page again. If I then go back
> > immediately to the Settings button for Speedtouch the Password box is again
> > empty, i.e. the system has not remembered it.
> >
> > This means that I cannot currently set up the PC to autodial my Internet
> > connection - I have to go through the process of opening Speedtouch and
> > manually keying in my password each time I want to log on.
> >
> > Please could you give me some advice on where, if at all, I'm going wrong?
> >
> > My PC is protected by McAfee and I have Windows Firewall enabled.
> >
> > Many thanks
> > Stuart
> |
|
| Back to top |
|
| |
External
Since: Jul 13, 2007
Posts: 100
|
(Msg. 8) Posted: Sun Aug 05, 2007 8:48 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Stuart" <Stuart RemoveThis @discussions.microsoft.com> wrote in message
news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
>I cannot save my Internet connection password. If I open my Internet
> connection manually by clicking on my Speedtouch icon, the only info saved
> is
> my username. The password is blank and I have to re-enter it each time to
> go
> online.
>
> When IE7 launches it attempts to log on but comes up with an "Error 691"
> message.
>
> If I open IE7, click on Tools and then Internet Properties I can see the
> Speedtouch Connection which I have set as the default. If I then
> highlight
> that and click on Settings, I see under Dial-up settings that my username
> is
> there but the Password is blank. If I enter the password and then click
> OK
> it returns me to the Internet Properties page again. If I then go back
> immediately to the Settings button for Speedtouch the Password box is
> again
> empty, i.e. the system has not remembered it.
>
> This means that I cannot currently set up the PC to autodial my Internet
> connection - I have to go through the process of opening Speedtouch and
> manually keying in my password each time I want to log on.
>
> Please could you give me some advice on where, if at all, I'm going wrong?
>
> My PC is protected by McAfee and I have Windows Firewall enabled.
>
> Many thanks
> Stuart
>
Stuart I have been reading this thread and the advice given so far has maybe
been a bit misleading.
The Speedtouch you have is a broadband modem I take it not a router so the
web IP address is not helpful.
When you said you clicked the Speedtouch icon, was that in the Network and
Sharing Center found in Control Panel?
Here you click the Manage Network Connections. Here you will see your ST
icon and a right click would give you several options to view Properties or
Repair.
I find it best to take the save tick out, rewrite the password etc' and put
the tick back.
--
Ian
With patience there is aways a way.
Please Reply to Newsgroup so all can read.
Requests for assistance by email can not and will be deleted. |
|
| Back to top |
|
| |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 9) Posted: Sun Aug 05, 2007 8:48 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks Ian
I've tried as you suggested but there's no option under View Properties via
this route to save a password. Where is this option?
Thanks for your patience
Stuart
"Ian Betts" wrote:
>
>
> "Stuart" <Stuart.TakeThisOut@discussions.microsoft.com> wrote in message
> news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
> >I cannot save my Internet connection password. If I open my Internet
> > connection manually by clicking on my Speedtouch icon, the only info saved
> > is
> > my username. The password is blank and I have to re-enter it each time to
> > go
> > online.
> >
> > When IE7 launches it attempts to log on but comes up with an "Error 691"
> > message.
> >
> > If I open IE7, click on Tools and then Internet Properties I can see the
> > Speedtouch Connection which I have set as the default. If I then
> > highlight
> > that and click on Settings, I see under Dial-up settings that my username
> > is
> > there but the Password is blank. If I enter the password and then click
> > OK
> > it returns me to the Internet Properties page again. If I then go back
> > immediately to the Settings button for Speedtouch the Password box is
> > again
> > empty, i.e. the system has not remembered it.
> >
> > This means that I cannot currently set up the PC to autodial my Internet
> > connection - I have to go through the process of opening Speedtouch and
> > manually keying in my password each time I want to log on.
> >
> > Please could you give me some advice on where, if at all, I'm going wrong?
> >
> > My PC is protected by McAfee and I have Windows Firewall enabled.
> >
> > Many thanks
> > Stuart
> >
> Stuart I have been reading this thread and the advice given so far has maybe
> been a bit misleading.
>
> The Speedtouch you have is a broadband modem I take it not a router so the
> web IP address is not helpful.
>
> When you said you clicked the Speedtouch icon, was that in the Network and
> Sharing Center found in Control Panel?
>
> Here you click the Manage Network Connections. Here you will see your ST
> icon and a right click would give you several options to view Properties or
> Repair.
>
> I find it best to take the save tick out, rewrite the password etc' and put
> the tick back.
>
> --
> Ian
>
> With patience there is aways a way.
>
> Please Reply to Newsgroup so all can read.
> Requests for assistance by email can not and will be deleted.
>
> |
|
| Back to top |
|
| |
External
Since: Jul 13, 2007
Posts: 100
|
(Msg. 10) Posted: Mon Aug 06, 2007 8:49 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Stuart" <Stuart RemoveThis @discussions.microsoft.com> wrote in message
news:4B1D3E56-4289-473B-A863-9AF163CAE08A@microsoft.com...
> Thanks Ian
>
> I've tried as you suggested but there's no option under View Properties
> via
> this route to save a password. Where is this option?
>
> Thanks for your patience
> Stuart
>
> "Ian Betts" wrote:
>
>>
>>
>> "Stuart" <Stuart RemoveThis @discussions.microsoft.com> wrote in message
>> news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
>> >I cannot save my Internet connection password. If I open my Internet
>> > connection manually by clicking on my Speedtouch icon, the only info
>> > saved
>> > is
>> > my username. The password is blank and I have to re-enter it each time
>> > to
>> > go
>> > online.
>> >
>> > When IE7 launches it attempts to log on but comes up with an "Error
>> > 691"
>> > message.
>> >
>> > If I open IE7, click on Tools and then Internet Properties I can see
>> > the
>> > Speedtouch Connection which I have set as the default. If I then
>> > highlight
>> > that and click on Settings, I see under Dial-up settings that my
>> > username
>> > is
>> > there but the Password is blank. If I enter the password and then
>> > click
>> > OK
>> > it returns me to the Internet Properties page again. If I then go back
>> > immediately to the Settings button for Speedtouch the Password box is
>> > again
>> > empty, i.e. the system has not remembered it.
>> >
>> > This means that I cannot currently set up the PC to autodial my
>> > Internet
>> > connection - I have to go through the process of opening Speedtouch and
>> > manually keying in my password each time I want to log on.
>> >
>> > Please could you give me some advice on where, if at all, I'm going
>> > wrong?
>> >
>> > My PC is protected by McAfee and I have Windows Firewall enabled.
>> >
>> > Many thanks
>> > Stuart
>> >
>> Stuart I have been reading this thread and the advice given so far has
>> maybe
>> been a bit misleading.
>>
>> The Speedtouch you have is a broadband modem I take it not a router so
>> the
>> web IP address is not helpful.
>>
>> When you said you clicked the Speedtouch icon, was that in the Network
>> and
>> Sharing Center found in Control Panel?
>>
>> Here you click the Manage Network Connections. Here you will see your ST
>> icon and a right click would give you several options to view Properties
>> or
>> Repair.
>>
>> I find it best to take the save tick out, rewrite the password etc' and
>> put
>> the tick back.
>>
>> --
>> Ian
>>
>> With patience there is aways a way.
>>
>> Please Reply to Newsgroup so all can read.
>> Requests for assistance by email can not and will be deleted.
>>
>>
>
Stuart did you see the Speedtouch listed in the Network Sharing Center. Did
you then click the Manage Network Connections link in the left hand list.
When that opened did you see you Speedtouch modem listed.
If you did all the above as outlined and did not see your modem listed,
unplug and reinstall the modem with your supplied CD.
If you did find it in the list select it and right click for a drop down
list. Use that list to make corrections.
--
Ian
With patience there is always a way.
Please Reply to Newsgroup so all can read.
Requests for assistance by email can not and will be deleted. |
|
| Back to top |
|
| |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 11) Posted: Mon Aug 06, 2007 8:58 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks, Ian
I have indeed tried those options but nowhere in the Properties is there an
option to save the password. I guess this is an anomoly of Vista - I never
had this problem with XP.
Oh well, I'll keep trying.....
Thanks for your help
Stuart
"Ian Betts" wrote:
>
>
> "Stuart" <Stuart DeleteThis @discussions.microsoft.com> wrote in message
> news:4B1D3E56-4289-473B-A863-9AF163CAE08A@microsoft.com...
> > Thanks Ian
> >
> > I've tried as you suggested but there's no option under View Properties
> > via
> > this route to save a password. Where is this option?
> >
> > Thanks for your patience
> > Stuart
> >
> > "Ian Betts" wrote:
> >
> >>
> >>
> >> "Stuart" <Stuart DeleteThis @discussions.microsoft.com> wrote in message
> >> news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
> >> >I cannot save my Internet connection password. If I open my Internet
> >> > connection manually by clicking on my Speedtouch icon, the only info
> >> > saved
> >> > is
> >> > my username. The password is blank and I have to re-enter it each time
> >> > to
> >> > go
> >> > online.
> >> >
> >> > When IE7 launches it attempts to log on but comes up with an "Error
> >> > 691"
> >> > message.
> >> >
> >> > If I open IE7, click on Tools and then Internet Properties I can see
> >> > the
> >> > Speedtouch Connection which I have set as the default. If I then
> >> > highlight
> >> > that and click on Settings, I see under Dial-up settings that my
> >> > username
> >> > is
> >> > there but the Password is blank. If I enter the password and then
> >> > click
> >> > OK
> >> > it returns me to the Internet Properties page again. If I then go back
> >> > immediately to the Settings button for Speedtouch the Password box is
> >> > again
> >> > empty, i.e. the system has not remembered it.
> >> >
> >> > This means that I cannot currently set up the PC to autodial my
> >> > Internet
> >> > connection - I have to go through the process of opening Speedtouch and
> >> > manually keying in my password each time I want to log on.
> >> >
> >> > Please could you give me some advice on where, if at all, I'm going
> >> > wrong?
> >> >
> >> > My PC is protected by McAfee and I have Windows Firewall enabled.
> >> >
> >> > Many thanks
> >> > Stuart
> >> >
> >> Stuart I have been reading this thread and the advice given so far has
> >> maybe
> >> been a bit misleading.
> >>
> >> The Speedtouch you have is a broadband modem I take it not a router so
> >> the
> >> web IP address is not helpful.
> >>
> >> When you said you clicked the Speedtouch icon, was that in the Network
> >> and
> >> Sharing Center found in Control Panel?
> >>
> >> Here you click the Manage Network Connections. Here you will see your ST
> >> icon and a right click would give you several options to view Properties
> >> or
> >> Repair.
> >>
> >> I find it best to take the save tick out, rewrite the password etc' and
> >> put
> >> the tick back.
> >>
> >> --
> >> Ian
> >>
> >> With patience there is aways a way.
> >>
> >> Please Reply to Newsgroup so all can read.
> >> Requests for assistance by email can not and will be deleted.
> >>
> >>
> >
> Stuart did you see the Speedtouch listed in the Network Sharing Center. Did
> you then click the Manage Network Connections link in the left hand list.
> When that opened did you see you Speedtouch modem listed.
>
> If you did all the above as outlined and did not see your modem listed,
> unplug and reinstall the modem with your supplied CD.
>
> If you did find it in the list select it and right click for a drop down
> list. Use that list to make corrections.
>
> --
> Ian
>
> With patience there is always a way.
>
> Please Reply to Newsgroup so all can read.
> Requests for assistance by email can not and will be deleted.
>
> |
|
| Back to top |
|
| |
External
Since: Oct 24, 2004
Posts: 14
|
(Msg. 12) Posted: Mon Aug 06, 2007 8:58 am
Post subject: Re: Internet connection will not remember my login password [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks, Ian
I have indeed tried those options but nowhere in the Properties is there an
option to save the password. I guess this is an anomoly of Vista - I never
had this problem with XP.
Oh well, I'll keep trying.....
Thanks for your help
Stuart
"Ian Betts" wrote:
>
>
> "Stuart" <Stuart RemoveThis @discussions.microsoft.com> wrote in message
> news:4B1D3E56-4289-473B-A863-9AF163CAE08A@microsoft.com...
> > Thanks Ian
> >
> > I've tried as you suggested but there's no option under View Properties
> > via
> > this route to save a password. Where is this option?
> >
> > Thanks for your patience
> > Stuart
> >
> > "Ian Betts" wrote:
> >
> >>
> >>
> >> "Stuart" <Stuart RemoveThis @discussions.microsoft.com> wrote in message
> >> news:DF58DE8C-6CC2-4A12-9057-E9BA1E6FCEFF@microsoft.com...
> >> >I cannot save my Internet connection password. If I open my Internet
> >> > connection manually by clicking on my Speedtouch icon, the only info
> >> > saved
> >> > is
> >> > my username. The password is blank and I have to re-enter it each time
> >> > to
> >> > go
> >> > online.
> >> >
> >> > When IE7 launches it attempts to log on but comes up with an "Error
> >> > 691"
> >> > message.
> >> >
> >> > If I open IE7, click on Tools and then Internet Properties I can see
> >> > the
> >> > Speedtouch Connection which I have set as the default. If I then
> >> > highlight
> >> > that and click on Settings, I see under Dial-up settings that my
> >> > username
> >> > is
> >> > there but the Password is blank. If I enter the password and then
> >> > click
> >> > OK
> >> > it returns me to the Internet Properties page again. If I then go back
> >> > immediately to the Settings button for Speedtouch the Password box is
> >> > again
> >> > empty, i.e. the system has not remembered it.
> >> >
> >> > This means that I cannot currently set up the PC to autodial my
> >> > Internet
> >> > connection - I have to go through the process of opening Speedtouch and
> >> > manually keying in my password each time I want to log on.
> >> >
> >> > Please could you give me some advice on where, if at all, I'm going
> >> > wrong?
> >> >
> >> > My PC is protected by McAfee and I have Windows Firewall enabled.
> >> >
> >> > Many thanks
> >> > Stuart
> >> >
> >> Stuart I have been reading this thread and the advice given so far has
> >> maybe
> >> been a bit misleading.
> >>
> >> The Speedtouch you have is a broadband modem I take it not a router so
> >> the
> >> web IP address is not helpful.
> >>
> >> When you said you clicked the Speedtouch icon, was that in the Network
> >> and
> >> Sharing Center found in Control Panel?
> >>
> >> Here you click the Manage Network Connections. Here you will see your ST
> >> icon and a right click would give you several options to view Properties
> >> or
> >> Repair.
> >>
> >> I find it best to take the save tick out, rewrite the password etc' and
> >> put
> >> the tick back.
> >>
> >> --
> >> Ian
> >>
> >> With patience there is aways a way.
> >>
> >> Please Reply to Newsgroup so all can read.
> >> Requests for assistance by email can not and will be deleted.
> >>
> >>
> >
> Stuart did you see the Speedtouch listed in the Network Sharing Center. Did
> you then click the Manage Network Connections link in the left hand list.
> When that opened did you see you Speedtouch modem listed.
>
> If you did all the above as outlined and did not see your modem listed,
> unplug and reinstall the modem with your supplied CD.
>
> If you did find it in the list select it and right click for a drop down
> list. Use that list to make corrections.
>
> --
> Ian
>
> With patience there is always a way.
>
> Please Reply to Newsgroup so all can read.
> Requests for assistance by email can not and will be deleted.
>
> |
|
| Back to top |
|
| |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
Windows