HP LaserJet 4300 PCL drivers problem

Thank you. I am using HP's drivers. I downloaded the most current versions
from their website, but they still do not work.

- Eli

"Ghostrider" wrote:

>
> Eli Tomlinson wrote:
>
> > After performing the most recent round of Patches, the PCL print drivers (5E
> > and 6) for the HP LaserJet 4300 stopped working properly. When I try to
> > print multiple pages, it appears to print the first two on top of each other
> > and then stop. I can print properly with the PostScript drivers, but I have
> > an application that requires PCL so I would like to get it working.
>
> Unless the patches came from HP, delete them and re-install the printer
> using the driver files from the cdrom that came with it. The danger of
> installing patches from other than the original manufacturer is that of
> not having any assurances of their performance. Sometimes, hardware patches
> from the Microsoft update site might even be beta versions of developmental
> changes to existing drivers.
>

It appears to be a widespread issue on several models and the blame is pointing at
a .Net 3.0 update. However uninstalling the update does not resolve the problem.
See:
http://forums1.itrc.hp.com/service/forums/bizsupport/categoryhome.do?c...goryId=

or if link wraps/breaks: http://tinyurl.com/25lamc



--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Eli Tomlinson" <EliTomlinson.TakeThisOut@discussions.microsoft.com> wrote in message
news:409ACEF8-C5DB-4E36-ACB2-06E3A8D17BDE@microsoft.com...
> After performing the most recent round of Patches, the PCL print drivers (5E
> and 6) for the HP LaserJet 4300 stopped working properly. When I try to
> print multiple pages, it appears to print the first two on top of each other
> and then stop. I can print properly with the PostScript drivers, but I have
> an application that requires PCL so I would like to get it working.

Thank you so much! It does coincide with the .NET 3.0 installation. I
submitted the issue to HP and will see what their reply is. Thank you again.
- Eli

"Brian A." wrote:

> It appears to be a widespread issue on several models and the blame is pointing at
> a .Net 3.0 update. However uninstalling the update does not resolve the problem.
> See:
> http://forums1.itrc.hp.com/service/forums/bizsupport/categoryhome.do?c...goryId=
>
> or if link wraps/breaks: http://tinyurl.com/25lamc
>
>
>
> --
>
> Brian A. Sesko { MS MVP_Shell/User }
> Conflicts start where information lacks.
> http://basconotw.mvps.org/
>
> Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
> How to ask a question: http://support.microsoft.com/kb/555375
>
>
>
> "Eli Tomlinson" <EliTomlinson.TakeThisOut@discussions.microsoft.com> wrote in message
> news:409ACEF8-C5DB-4E36-ACB2-06E3A8D17BDE@microsoft.com...
> > After performing the most recent round of Patches, the PCL print drivers (5E
> > and 6) for the HP LaserJet 4300 stopped working properly. When I try to
> > print multiple pages, it appears to print the first two on top of each other
> > and then stop. I can print properly with the PostScript drivers, but I have
> > an application that requires PCL so I would like to get it working.
>
>

Go to the link I provided and check out a few posts on multiple print jobs printing
on same page, there are a few workarounds/solutions.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Eli Tomlinson" <EliTomlinson.RemoveThis@discussions.microsoft.com> wrote in message
news:5A7E259C-ECD0-4EF0-A573-A08F7A43F50C@microsoft.com...
> Thank you so much! It does coincide with the .NET 3.0 installation. I
> submitted the issue to HP and will see what their reply is. Thank you again.
> - Eli
>
> "Brian A." wrote:
>
>> It appears to be a widespread issue on several models and the blame is pointing
>> at
>> a .Net 3.0 update. However uninstalling the update does not resolve the problem.
>> See:
>> http://forums1.itrc.hp.com/service/forums/bizsupport/categoryhome.do?c...goryId=
>>
>> or if link wraps/breaks: http://tinyurl.com/25lamc
>>
>>
>>
>> --
>>
>> Brian A. Sesko { MS MVP_Shell/User }
>> Conflicts start where information lacks.
>> http://basconotw.mvps.org/
>>
>> Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
>> How to ask a question: http://support.microsoft.com/kb/555375
>>
>>
>>
>> "Eli Tomlinson" <EliTomlinson.RemoveThis@discussions.microsoft.com> wrote in message
>> news:409ACEF8-C5DB-4E36-ACB2-06E3A8D17BDE@microsoft.com...
>> > After performing the most recent round of Patches, the PCL print drivers (5E
>> > and 6) for the HP LaserJet 4300 stopped working properly. When I try to
>> > print multiple pages, it appears to print the first two on top of each other
>> > and then stop. I can print properly with the PostScript drivers, but I have
>> > an application that requires PCL so I would like to get it working.
>>
>>

HP seems to be almost ignoring the issue when it comes to their software and
incompatibilities with .net 3.0. I had a prob where Director would open, but
no info was available on the pages (web page could not be found). If you
don't need the additions that .net 3.0 provides, simply turn it off in Vista
(Control panel, programs and features, turn windows features on and off),
therefore using .net 2.0 essentially, or uninstall it in 2000 or XP. I'm sure
many of you will find this a very easy solution to an extremely vexing
problem!

"Eli Tomlinson" wrote:

> Thank you. I am using HP's drivers. I downloaded the most current versions
> from their website, but they still do not work.
>
> - Eli
>
> "Ghostrider" wrote:
>
> >
> > Eli Tomlinson wrote:
> >
> > > After performing the most recent round of Patches, the PCL print drivers (5E
> > > and 6) for the HP LaserJet 4300 stopped working properly. When I try to
> > > print multiple pages, it appears to print the first two on top of each other
> > > and then stop. I can print properly with the PostScript drivers, but I have
> > > an application that requires PCL so I would like to get it working.
> >
> > Unless the patches came from HP, delete them and re-install the printer
> > using the driver files from the cdrom that came with it. The danger of
> > installing patches from other than the original manufacturer is that of
> > not having any assurances of their performance. Sometimes, hardware patches
> > from the Microsoft update site might even be beta versions of developmental
> > changes to existing drivers.
> >