STOP 0x000000D1 IRQL_NOT_LESS_OR_EQUAL Kbdclass.sys

If you are unsure what to do > open Help & Support > in search box > enter
"system restore"
From the help box select appropriate topic you require 'How to delete
Restore points" & follow directions.
--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.



"Jacques" wrote:

>
> I have the same problem as described in the Microsoft article at
> http://support.microsoft.com/kb/810980/en-us
> The problem is that I don't have a logitech mouse.
> I did 4 system restore to go back to a restore point when I didn't have this
> stop error problem. But at the 4th restore attempt, it failed because there
> was not enough space. But on my PC, there is plenty of free space. And now,
> the restore points have disappeared so I can't go back to a point where I
> didn't have this error.
> What can I do ?

I realize that you do not have a Logitech mouse, but if you open Device
Manager > Mice & other...., does it show a Logitech device?
Do you have a Logitech Joystick installed?
If you have a Logitech device showing, and you are sure you do not require
it, disable, see what happens, if no problems, then uninstall the driver.

--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.



"Jacques" wrote:

>
> I have the same problem as described in the Microsoft article at
> http://support.microsoft.com/kb/810980/en-us
> The problem is that I don't have a logitech mouse.
> I did 4 system restore to go back to a restore point when I didn't have this
> stop error problem. But at the 4th restore attempt, it failed because there
> was not enough space. But on my PC, there is plenty of free space. And now,
> the restore points have disappeared so I can't go back to a point where I
> didn't have this error.
> What can I do ?

There is no logitech device there.

"Bob J" wrote:

> I realize that you do not have a Logitech mouse, but if you open Device
> Manager > Mice & other...., does it show a Logitech device?
> Do you have a Logitech Joystick installed?
> If you have a Logitech device showing, and you are sure you do not require
> it, disable, see what happens, if no problems, then uninstall the driver.
>
> --
> Regards
> Bob J
> If advise given from anyone, solves problem or not, or if solved from
> another source,post back & let us know.
> Then we all benefit.
>
>
>
> "Jacques" wrote:
>
> >
> > I have the same problem as described in the Microsoft article at
> > http://support.microsoft.com/kb/810980/en-us
> > The problem is that I don't have a logitech mouse.
> > I did 4 system restore to go back to a restore point when I didn't have this
> > stop error problem. But at the 4th restore attempt, it failed because there
> > was not enough space. But on my PC, there is plenty of free space. And now,
> > the restore points have disappeared so I can't go back to a point where I
> > didn't have this error.
> > What can I do ?

Does a report relating the the error appear in "Problem Report & Solutions" >
View Problem History.
If it does r/click on report > from the box select > View problem details.
What remarks are there under > Description?
--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.



"Jacques" wrote:

> There is no logitech device there.
>
> "Bob J" wrote:
>
> > I realize that you do not have a Logitech mouse, but if you open Device
> > Manager > Mice & other...., does it show a Logitech device?
> > Do you have a Logitech Joystick installed?
> > If you have a Logitech device showing, and you are sure you do not require
> > it, disable, see what happens, if no problems, then uninstall the driver.
> >
> > --
> > Regards
> > Bob J
> > If advise given from anyone, solves problem or not, or if solved from
> > another source,post back & let us know.
> > Then we all benefit.
> >
> >
> >
> > "Jacques" wrote:
> >
> > >
> > > I have the same problem as described in the Microsoft article at
> > > http://support.microsoft.com/kb/810980/en-us
> > > The problem is that I don't have a logitech mouse.
> > > I did 4 system restore to go back to a restore point when I didn't have this
> > > stop error problem. But at the 4th restore attempt, it failed because there
> > > was not enough space. But on my PC, there is plenty of free space. And now,
> > > the restore points have disappeared so I can't go back to a point where I
> > > didn't have this error.
> > > What can I do ?

Where can I see "Problem Report & Solutions" ?

"Bob J" wrote:

> Does a report relating the the error appear in "Problem Report & Solutions" >
> View Problem History.
> If it does r/click on report > from the box select > View problem details.
> What remarks are there under > Description?
> --
> Regards
> Bob J
> If advise given from anyone, solves problem or not, or if solved from
> another source,post back & let us know.
> Then we all benefit.
>
>
>
> "Jacques" wrote:
>
> > There is no logitech device there.
> >
> > "Bob J" wrote:
> >
> > > I realize that you do not have a Logitech mouse, but if you open Device
> > > Manager > Mice & other...., does it show a Logitech device?
> > > Do you have a Logitech Joystick installed?
> > > If you have a Logitech device showing, and you are sure you do not require
> > > it, disable, see what happens, if no problems, then uninstall the driver.
> > >
> > > --
> > > Regards
> > > Bob J
> > > If advise given from anyone, solves problem or not, or if solved from
> > > another source,post back & let us know.
> > > Then we all benefit.
> > >
> > >
> > >
> > > "Jacques" wrote:
> > >
> > > >
> > > > I have the same problem as described in the Microsoft article at
> > > > http://support.microsoft.com/kb/810980/en-us
> > > > The problem is that I don't have a logitech mouse.
> > > > I did 4 system restore to go back to a restore point when I didn't have this
> > > > stop error problem. But at the 4th restore attempt, it failed because there
> > > > was not enough space. But on my PC, there is plenty of free space. And now,
> > > > the restore points have disappeared so I can't go back to a point where I
> > > > didn't have this error.
> > > > What can I do ?

Control Panel > Programs Reports & Solutions
What I am trying to do is make sure that you do not have a real problem
relating to the error message, seeing you do not have a Logitech devise.
The report may relate to a real problem!!!!
Is everything working alright otherwise?
--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.



"Jacques" wrote:

> Where can I see "Problem Report & Solutions" ?
>
> "Bob J" wrote:
>
> > Does a report relating the the error appear in "Problem Report & Solutions" >
> > View Problem History.
> > If it does r/click on report > from the box select > View problem details.
> > What remarks are there under > Description?
> > --
> > Regards
> > Bob J
> > If advise given from anyone, solves problem or not, or if solved from
> > another source,post back & let us know.
> > Then we all benefit.
> >
> >
> >
> > "Jacques" wrote:
> >
> > > There is no logitech device there.
> > >
> > > "Bob J" wrote:
> > >
> > > > I realize that you do not have a Logitech mouse, but if you open Device
> > > > Manager > Mice & other...., does it show a Logitech device?
> > > > Do you have a Logitech Joystick installed?
> > > > If you have a Logitech device showing, and you are sure you do not require
> > > > it, disable, see what happens, if no problems, then uninstall the driver.
> > > >
> > > > --
> > > > Regards
> > > > Bob J
> > > > If advise given from anyone, solves problem or not, or if solved from
> > > > another source,post back & let us know.
> > > > Then we all benefit.
> > > >
> > > >
> > > >
> > > > "Jacques" wrote:
> > > >
> > > > >
> > > > > I have the same problem as described in the Microsoft article at
> > > > > http://support.microsoft.com/kb/810980/en-us
> > > > > The problem is that I don't have a logitech mouse.
> > > > > I did 4 system restore to go back to a restore point when I didn't have this
> > > > > stop error problem. But at the 4th restore attempt, it failed because there
> > > > > was not enough space. But on my PC, there is plenty of free space. And now,
> > > > > the restore points have disappeared so I can't go back to a point where I
> > > > > didn't have this error.
> > > > > What can I do ?

I don't have this in control panel.
Everything is working fine, except that.

"Bob J" wrote:

> Control Panel > Programs Reports & Solutions
> What I am trying to do is make sure that you do not have a real problem
> relating to the error message, seeing you do not have a Logitech devise.
> The report may relate to a real problem!!!!
> Is everything working alright otherwise?
> --
> Regards
> Bob J
> If advise given from anyone, solves problem or not, or if solved from
> another source,post back & let us know.
> Then we all benefit.
>
>
>
> "Jacques" wrote:
>
> > Where can I see "Problem Report & Solutions" ?
> >
> > "Bob J" wrote:
> >
> > > Does a report relating the the error appear in "Problem Report & Solutions" >
> > > View Problem History.
> > > If it does r/click on report > from the box select > View problem details.
> > > What remarks are there under > Description?
> > > --
> > > Regards
> > > Bob J
> > > If advise given from anyone, solves problem or not, or if solved from
> > > another source,post back & let us know.
> > > Then we all benefit.
> > >
> > >
> > >
> > > "Jacques" wrote:
> > >
> > > > There is no logitech device there.
> > > >
> > > > "Bob J" wrote:
> > > >
> > > > > I realize that you do not have a Logitech mouse, but if you open Device
> > > > > Manager > Mice & other...., does it show a Logitech device?
> > > > > Do you have a Logitech Joystick installed?
> > > > > If you have a Logitech device showing, and you are sure you do not require
> > > > > it, disable, see what happens, if no problems, then uninstall the driver.
> > > > >
> > > > > --
> > > > > Regards
> > > > > Bob J
> > > > > If advise given from anyone, solves problem or not, or if solved from
> > > > > another source,post back & let us know.
> > > > > Then we all benefit.
> > > > >
> > > > >
> > > > >
> > > > > "Jacques" wrote:
> > > > >
> > > > > >
> > > > > > I have the same problem as described in the Microsoft article at
> > > > > > http://support.microsoft.com/kb/810980/en-us
> > > > > > The problem is that I don't have a logitech mouse.
> > > > > > I did 4 system restore to go back to a restore point when I didn't have this
> > > > > > stop error problem. But at the 4th restore attempt, it failed because there
> > > > > > was not enough space. But on my PC, there is plenty of free space. And now,
> > > > > > the restore points have disappeared so I can't go back to a point where I
> > > > > > didn't have this error.
> > > > > > What can I do ?

I assume you are referring to Vista OS?
If Vista r/click start orb > in search box type 'problem report & solutions'
> then a r/click on the item that matches > follow my previous inst.

--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.

No because we are in the XP Media Center Edition newsgroup.

"Bob J" wrote:

> I assume you are referring to Vista OS?
> If Vista r/click start orb > in search box type 'problem report & solutions'
> > then a r/click on the item that matches > follow my previous inst.
>
> --
> Regards
> Bob J
> If advise given from anyone, solves problem or not, or if solved from
> another source,post back & let us know.
> Then we all benefit.
>
>
>
>
>

Group also listed on Vista Community appears same group on XP & Vista
Communities.
Suggest post question on XP General because your problem does not really
relate to WMC.
I will keep checking if I get solution will post back.
--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.



"Jacques" wrote:

> No because we are in the XP Media Center Edition newsgroup.
>
> "Bob J" wrote:
>
> > I assume you are referring to Vista OS?
> > If Vista r/click start orb > in search box type 'problem report & solutions'
> > > then a r/click on the item that matches > follow my previous inst.
> >
> > --
> > Regards
> > Bob J
> > If advise given from anyone, solves problem or not, or if solved from
> > another source,post back & let us know.
> > Then we all benefit.
> >
> >
> >
> >
> >

Thanks. I finally found the solution myself. That's because I uninstalled a
key logger software without disactivating the software. So I reinstalled it,
desactivated it, closed the software and uninstalled. And it was fine

"Bob J" wrote:

> Group also listed on Vista Community appears same group on XP & Vista
> Communities.
> Suggest post question on XP General because your problem does not really
> relate to WMC.
> I will keep checking if I get solution will post back.
> --
> Regards
> Bob J
> If advise given from anyone, solves problem or not, or if solved from
> another source,post back & let us know.
> Then we all benefit.
>
>
>
> "Jacques" wrote:
>
> > No because we are in the XP Media Center Edition newsgroup.
> >
> > "Bob J" wrote:
> >
> > > I assume you are referring to Vista OS?
> > > If Vista r/click start orb > in search box type 'problem report & solutions'
> > > > then a r/click on the item that matches > follow my previous inst.
> > >
> > > --
> > > Regards
> > > Bob J
> > > If advise given from anyone, solves problem or not, or if solved from
> > > another source,post back & let us know.
> > > Then we all benefit.
> > >
> > >
> > >
> > >
> > >

I suspect *nobody* has it in Control Panel

Try this:
Right click on my computer and select Manage.
Open Performance Logs and Alerts under Sytem Tools in the left panel.

On 7/15/2007, Jacques posted this:
> I don't have this in control panel.
> Everything is working fine, except that.
>
> "Bob J" wrote:
>
>> Control Panel > Programs Reports & Solutions
>> What I am trying to do is make sure that you do not have a real problem
>> relating to the error message, seeing you do not have a Logitech devise.
>> The report may relate to a real problem!!!!
>> Is everything working alright otherwise?
>> --
>> Regards
>> Bob J
>> If advise given from anyone, solves problem or not, or if solved from
>> another source,post back & let us know.
>> Then we all benefit.
>>
>>
>>
>> "Jacques" wrote:
>>
>>> Where can I see "Problem Report & Solutions" ?
>>>
>>> "Bob J" wrote:
>>>
>>>> Does a report relating the the error appear in "Problem Report &
>>>> Solutions" > View Problem History.
>>>> If it does r/click on report > from the box select > View problem details.
>>>> What remarks are there under > Description?

<SNIP>

--
Gene E. Bloch (Gino)
letters617blochg3251
(replace the numbers by "at" and "dotcom")