Rollup 2 Error 3 & no Tuner found??

Robert, also THANK YOU! Where can I reinstall this Net 1.1 runtime is this
for Windows.

Im actually a Systems Engeneer for Apple and have started playing with MCE
and have had one hurdle to the next - again thanks for the help guys.

"Robert Schlabbach" wrote:

> mscoree.dll is a core component of the .NET runtimes. Apparently, you have
> a wrong (old) version of this file on your machine. Try reinstalling the
> ..NET 1.1 runtimes to fix this.
>
> Regards,
> --
> Robert Schlabbach
> e-mail: robert_s.RemoveThis@gmx.net
> Berlin, Germany
>
> "dopher" <dopher.RemoveThis@discussions.microsoft.com> wrote in message
> news:53C8580C-A093-4802-BAFF-2B62E4162288@microsoft.com...
> > As soon as I ran this a dialog popped up:
> >
> > ngen.exe - Entry Point Not Found
> > The procedure entry point GetRequestedRuntimeVersion could not be located
> in
> > the dynamic link library mscoree.dll
> >
> > ** also ngen.exe processes with 00 CPU/604K Mem usage load keep
> populating
> > In the time I wrote this I want from 5 entries to like 10.
> >
> >
> >
> > "mcedude-2005" wrote:
> >
> > > Try the following from a command prompt:
> > >
> > > - C:\windows\Ehome\medctrro.exe /o RunOnce >nul
> > >
> > > wait 2 minutes or until CPU/Processor activity in task manager is 0%
> > >
> > > This should run through the script that media center uses on first boot
> > > to install anbd register the components and services. After running,
> > > check the file C:\windows\medctroc.Log for error messages at the time
> > > you ran the above command. If there are no errors , hit the green
> > > button and see if it works.
> > >
> > >
>
>

1.1 @
http://www.microsoft.com/downloads/details.aspx?FamilyID=262d25e3-f589...42-8157

Al


"dopher" <dopher.TakeThisOut@discussions.microsoft.com> wrote in message
news:4E9FF319-1464-4D7B-906A-178E5ADE0CF3@microsoft.com...
> Robert, also THANK YOU! Where can I reinstall this Net 1.1 runtime is
> this
> for Windows.
>
> Im actually a Systems Engeneer for Apple and have started playing with MCE
> and have had one hurdle to the next - again thanks for the help guys.
>
> "Robert Schlabbach" wrote:
>
>> mscoree.dll is a core component of the .NET runtimes. Apparently, you
>> have
>> a wrong (old) version of this file on your machine. Try reinstalling the
>> ..NET 1.1 runtimes to fix this.
>>
>> Regards,
>> --
>> Robert Schlabbach
>> e-mail: robert_s.TakeThisOut@gmx.net
>> Berlin, Germany
>>
>> "dopher" <dopher.TakeThisOut@discussions.microsoft.com> wrote in message
>> news:53C8580C-A093-4802-BAFF-2B62E4162288@microsoft.com...
>> > As soon as I ran this a dialog popped up:
>> >
>> > ngen.exe - Entry Point Not Found
>> > The procedure entry point GetRequestedRuntimeVersion could not be
>> > located
>> in
>> > the dynamic link library mscoree.dll
>> >
>> > ** also ngen.exe processes with 00 CPU/604K Mem usage load keep
>> populating
>> > In the time I wrote this I want from 5 entries to like 10.
>> >
>> >
>> >
>> > "mcedude-2005" wrote:
>> >
>> > > Try the following from a command prompt:
>> > >
>> > > - C:\windows\Ehome\medctrro.exe /o RunOnce >nul
>> > >
>> > > wait 2 minutes or until CPU/Processor activity in task manager is 0%
>> > >
>> > > This should run through the script that media center uses on first
>> > > boot
>> > > to install anbd register the components and services. After running,
>> > > check the file C:\windows\medctroc.Log for error messages at the time
>> > > you ran the above command. If there are no errors , hit the green
>> > > button and see if it works.
>> > >
>> > >
>>
>>

Thanks for all your help. I am up and running, not so sure it was worth all
the hasle but it does work. I have to reset all my series and a few other
things but all seems well. When I remember back I did have an issue when one
of the .net installs had a problem from the windows update. That must have
beem mine and many others who are having problems with the upgrade.

Definately worth removing all the .net stuff and then installing. The update
gets all the lastest .net fixes and the roll up in one go.

So again thanks for all you help and everyone else who made suggestions.

Alan

"mcedude-2005" wrote:

> That's good to hear Alan B. Let us know how everything is working.
> Perhaps it was a corrupt .net install.
>
>

I have three .nets installed in my computer, they are Microsoft.net Framework
1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets before
I update my MCE to rollup 2 ? I have a Hp m7170n Media Center

"Alan B" wrote:

> Thanks for all your help. I am up and running, not so sure it was worth all
> the hasle but it does work. I have to reset all my series and a few other
> things but all seems well. When I remember back I did have an issue when one
> of the .net installs had a problem from the windows update. That must have
> beem mine and many others who are having problems with the upgrade.
>
> Definately worth removing all the .net stuff and then installing. The update
> gets all the lastest .net fixes and the roll up in one go.
>
> So again thanks for all you help and everyone else who made suggestions.
>
> Alan
>
> "mcedude-2005" wrote:
>
> > That's good to hear Alan B. Let us know how everything is working.
> > Perhaps it was a corrupt .net install.
> >
> >

You actually *need* .net Framework 1.1 and the .net Framework 1.1 SP1 for
Rollup 2 to work properly. Those need to be properly installed before
Rollup 2 will work.

--
Gary Tsang
Microsoft MVP - Windows XP Shell/User
http://www.microsoft.com/mvp


"rcjian" <rcjian.DeleteThis@discussions.microsoft.com> wrote in message
news:15A907FF-35F6-4E87-82EC-8A75793C88FD@microsoft.com...
>I have three .nets installed in my computer, they are Microsoft.net
>Framework
> 1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
> Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets
> before
> I update my MCE to rollup 2 ? I have a Hp m7170n Media Center
>
> "Alan B" wrote:
>
>> Thanks for all your help. I am up and running, not so sure it was worth
>> all
>> the hasle but it does work. I have to reset all my series and a few other
>> things but all seems well. When I remember back I did have an issue when
>> one
>> of the .net installs had a problem from the windows update. That must
>> have
>> beem mine and many others who are having problems with the upgrade.
>>
>> Definately worth removing all the .net stuff and then installing. The
>> update
>> gets all the lastest .net fixes and the roll up in one go.
>>
>> So again thanks for all you help and everyone else who made suggestions.
>>
>> Alan
>>
>> "mcedude-2005" wrote:
>>
>> > That's good to hear Alan B. Let us know how everything is working.
>> > Perhaps it was a corrupt .net install.
>> >
>> >

Now I'm confused, so out of the three .nets I have in my PC, which one should
I uninstall before doing the rollup2 update, Thanks Gary Tsang in advance.
Sorry I'm still an amatuer regarding these stuff.

"Gary Tsang" wrote:

> You actually *need* .net Framework 1.1 and the .net Framework 1.1 SP1 for
> Rollup 2 to work properly. Those need to be properly installed before
> Rollup 2 will work.
>
> --
> Gary Tsang
> Microsoft MVP - Windows XP Shell/User
> http://www.microsoft.com/mvp
>
>
> "rcjian" <rcjian RemoveThis @discussions.microsoft.com> wrote in message
> news:15A907FF-35F6-4E87-82EC-8A75793C88FD@microsoft.com...
> >I have three .nets installed in my computer, they are Microsoft.net
> >Framework
> > 1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
> > Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets
> > before
> > I update my MCE to rollup 2 ? I have a Hp m7170n Media Center
> >
> > "Alan B" wrote:
> >
> >> Thanks for all your help. I am up and running, not so sure it was worth
> >> all
> >> the hasle but it does work. I have to reset all my series and a few other
> >> things but all seems well. When I remember back I did have an issue when
> >> one
> >> of the .net installs had a problem from the windows update. That must
> >> have
> >> beem mine and many others who are having problems with the upgrade.
> >>
> >> Definately worth removing all the .net stuff and then installing. The
> >> update
> >> gets all the lastest .net fixes and the roll up in one go.
> >>
> >> So again thanks for all you help and everyone else who made suggestions.
> >>
> >> Alan
> >>
> >> "mcedude-2005" wrote:
> >>
> >> > That's good to hear Alan B. Let us know how everything is working.
> >> > Perhaps it was a corrupt .net install.
> >> >
> >> >
>
>
>

It really depends. For some reason, a few of us have mixed versions of .net
installed. That is a mix of 1.0 and 1.1 which will cause the update to
fail. It is critical that a good working version of .net 1.1 with SP1 is
installed before applying the rollup.

So if you have 1.1 with SP1 installed and do NOT have hotfix 886904
installed as per http://support.microsoft.com/?kbid=900325 then proceed with
the update.

If the update fails and you get tuner not found and component registration
failure, then you need to remove the update and remove all .net aspects from
your computer.

Now with a clean slate - reinstall .net 1.1 and the SP1 then proceed with
the rollup.

Hope that helps

Al

"rcjian" <rcjian.TakeThisOut@discussions.microsoft.com> wrote in message
news:5F4047A2-BF60-4DF1-8C23-5424F3B75317@microsoft.com...
> Now I'm confused, so out of the three .nets I have in my PC, which one
> should
> I uninstall before doing the rollup2 update, Thanks Gary Tsang in advance.
> Sorry I'm still an amatuer regarding these stuff.
>
> "Gary Tsang" wrote:
>
>> You actually *need* .net Framework 1.1 and the .net Framework 1.1 SP1 for
>> Rollup 2 to work properly. Those need to be properly installed before
>> Rollup 2 will work.
>>
>> --
>> Gary Tsang
>> Microsoft MVP - Windows XP Shell/User
>> http://www.microsoft.com/mvp
>>
>>
>> "rcjian" <rcjian.TakeThisOut@discussions.microsoft.com> wrote in message
>> news:15A907FF-35F6-4E87-82EC-8A75793C88FD@microsoft.com...
>> >I have three .nets installed in my computer, they are Microsoft.net
>> >Framework
>> > 1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
>> > Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets
>> > before
>> > I update my MCE to rollup 2 ? I have a Hp m7170n Media Center
>> >
>> > "Alan B" wrote:
>> >
>> >> Thanks for all your help. I am up and running, not so sure it was
>> >> worth
>> >> all
>> >> the hasle but it does work. I have to reset all my series and a few
>> >> other
>> >> things but all seems well. When I remember back I did have an issue
>> >> when
>> >> one
>> >> of the .net installs had a problem from the windows update. That must
>> >> have
>> >> beem mine and many others who are having problems with the upgrade.
>> >>
>> >> Definately worth removing all the .net stuff and then installing. The
>> >> update
>> >> gets all the lastest .net fixes and the roll up in one go.
>> >>
>> >> So again thanks for all you help and everyone else who made
>> >> suggestions.
>> >>
>> >> Alan
>> >>
>> >> "mcedude-2005" wrote:
>> >>
>> >> > That's good to hear Alan B. Let us know how everything is working.
>> >> > Perhaps it was a corrupt .net install.
>> >> >
>> >> >
>>
>>
>>

Thanks Al Lounsbury for the information, i think I'm going to wait for now
until I'm sure how to do this and update it at a later time. Thanks a lot!

"Al Lounsbury" wrote:

> It really depends. For some reason, a few of us have mixed versions of .net
> installed. That is a mix of 1.0 and 1.1 which will cause the update to
> fail. It is critical that a good working version of .net 1.1 with SP1 is
> installed before applying the rollup.
>
> So if you have 1.1 with SP1 installed and do NOT have hotfix 886904
> installed as per http://support.microsoft.com/?kbid=900325 then proceed with
> the update.
>
> If the update fails and you get tuner not found and component registration
> failure, then you need to remove the update and remove all .net aspects from
> your computer.
>
> Now with a clean slate - reinstall .net 1.1 and the SP1 then proceed with
> the rollup.
>
> Hope that helps
>
> Al
>
> "rcjian" <rcjian.DeleteThis@discussions.microsoft.com> wrote in message
> news:5F4047A2-BF60-4DF1-8C23-5424F3B75317@microsoft.com...
> > Now I'm confused, so out of the three .nets I have in my PC, which one
> > should
> > I uninstall before doing the rollup2 update, Thanks Gary Tsang in advance.
> > Sorry I'm still an amatuer regarding these stuff.
> >
> > "Gary Tsang" wrote:
> >
> >> You actually *need* .net Framework 1.1 and the .net Framework 1.1 SP1 for
> >> Rollup 2 to work properly. Those need to be properly installed before
> >> Rollup 2 will work.
> >>
> >> --
> >> Gary Tsang
> >> Microsoft MVP - Windows XP Shell/User
> >> http://www.microsoft.com/mvp
> >>
> >>
> >> "rcjian" <rcjian.DeleteThis@discussions.microsoft.com> wrote in message
> >> news:15A907FF-35F6-4E87-82EC-8A75793C88FD@microsoft.com...
> >> >I have three .nets installed in my computer, they are Microsoft.net
> >> >Framework
> >> > 1.0 Hotfix (KB887998) , Microsoft.net Framework 1.1 and Microsoft.net
> >> > Framework 1.1 Hotfix (KB886903). So do I have to uninstall these .nets
> >> > before
> >> > I update my MCE to rollup 2 ? I have a Hp m7170n Media Center
> >> >
> >> > "Alan B" wrote:
> >> >
> >> >> Thanks for all your help. I am up and running, not so sure it was
> >> >> worth
> >> >> all
> >> >> the hasle but it does work. I have to reset all my series and a few
> >> >> other
> >> >> things but all seems well. When I remember back I did have an issue
> >> >> when
> >> >> one
> >> >> of the .net installs had a problem from the windows update. That must
> >> >> have
> >> >> beem mine and many others who are having problems with the upgrade.
> >> >>
> >> >> Definately worth removing all the .net stuff and then installing. The
> >> >> update
> >> >> gets all the lastest .net fixes and the roll up in one go.
> >> >>
> >> >> So again thanks for all you help and everyone else who made
> >> >> suggestions.
> >> >>
> >> >> Alan
> >> >>
> >> >> "mcedude-2005" wrote:
> >> >>
> >> >> > That's good to hear Alan B. Let us know how everything is working.
> >> >> > Perhaps it was a corrupt .net install.
> >> >> >
> >> >> >
> >>
> >>
> >>
>
>
>

Resolution: Mine is now working its so wierd. Delete from the Add/Remove
Control panel.

The FrameWorks 1.1
The Rollup 2
and the critical update

Essentualy your back to where you were....

Then AutoUpdate from MS and everything works!



"Alan B" wrote:

> I ran the rollup 2 and the update. I now have a problem with error code 3.
> when running the set up again MCE tells me that no tunner not installed or
> not working. I tried uninstalling back to rollup 1 but MCE will not start.
> With rollup 2 installed I can use most feature except live TV basically I get
> the error no tuner. It was fine this morning before the update, so I assume
> my tv tuner is there.
>
>
> Does anyone have any ideas as to what might have gone wrong. Also how do I
> install new tuner software. The device manager seems to think it is working
> fine.
>
> Alan

Dopher,

Which critical update are you referring to when you suggest that it be
removed using A/RP?

"dopher" wrote:

> Resolution: Mine is now working its so wierd. Delete from the Add/Remove
> Control panel.
>
> The FrameWorks 1.1
> The Rollup 2
> and the critical update
>
> Essentualy your back to where you were....
>
> Then AutoUpdate from MS and everything works!
>
>
>
> "Alan B" wrote:
>
> > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > when running the set up again MCE tells me that no tunner not installed or
> > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > With rollup 2 installed I can use most feature except live TV basically I get
> > the error no tuner. It was fine this morning before the update, so I assume
> > my tv tuner is there.
> >
> >
> > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > install new tuner software. The device manager seems to think it is working
> > fine.
> >
> > Alan

Sorry, I just found the KB article (900325) detailing that 886904 needs to be
uninstalled before doing Rollup #2.

"dancook" wrote:

> Dopher,
>
> Which critical update are you referring to when you suggest that it be
> removed using A/RP?
>
> "dopher" wrote:
>
> > Resolution: Mine is now working its so wierd. Delete from the Add/Remove
> > Control panel.
> >
> > The FrameWorks 1.1
> > The Rollup 2
> > and the critical update
> >
> > Essentualy your back to where you were....
> >
> > Then AutoUpdate from MS and everything works!
> >
> >
> >
> > "Alan B" wrote:
> >
> > > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > > when running the set up again MCE tells me that no tunner not installed or
> > > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > > With rollup 2 installed I can use most feature except live TV basically I get
> > > the error no tuner. It was fine this morning before the update, so I assume
> > > my tv tuner is there.
> > >
> > >
> > > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > > install new tuner software. The device manager seems to think it is working
> > > fine.
> > >
> > > Alan

I have the same problem. Everything works except my recorded videos and live
tv. Does anybody have any suggestions?
"dopher" wrote:

> Yup. I have an HP Media Center with the x600 Pro and after the update it
> refuses to go to anything TV related. I have done everything to try to get
> this to work.
>
> The error I get is this:
>
> From the Media Setup Wizard when it gets to setup of TV Tuner:
>
> Critical Process Failure-
> A Critical Media Center Process has failed. If the problem persists, please
> restart your machine and try again, or contact Technical Support CODE: 3
>
> Then from the Media Center Setup under TV Setup you get this message:
>
> Tuner Not Found-
> The Tuner Hardware is either malfunctioning or not installed. Please ensure
> that both the tuner hardware and a valid tuner hardware driver are installed.
>
> All other features seem to work for the media center, videos, pictures and
> music are all working, I did not try DVD's however.
>
> This is a nightmare, Where do we go from here?
>
> "Alan B" wrote:
>
> > I ran the rollup 2 and the update. I now have a problem with error code 3.
> > when running the set up again MCE tells me that no tunner not installed or
> > not working. I tried uninstalling back to rollup 1 but MCE will not start.
> > With rollup 2 installed I can use most feature except live TV basically I get
> > the error no tuner. It was fine this morning before the update, so I assume
> > my tv tuner is there.
> >
> >
> > Does anyone have any ideas as to what might have gone wrong. Also how do I
> > install new tuner software. The device manager seems to think it is working
> > fine.
> >
> > Alan

See this blog entry by a member of the MCE Setup team.

How to fix component registration failures after installing Update Rollup 2
for Media Center 2005
http://blogs.msdn.com/astebner/archive/2005/10/18/482472.aspx

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Ivan M" <Ivan M.DeleteThis@discussions.microsoft.com> wrote in message
news:DEB3F4D1-2B1B-4B93-B7B0-39999B7EDFF0@microsoft.com...
>
> I have the same problem. Everything works except my recorded videos and
> live
> tv. Does anybody have any suggestions?
> "dopher" wrote:
>
>> Yup. I have an HP Media Center with the x600 Pro and after the update it
>> refuses to go to anything TV related. I have done everything to try to
>> get
>> this to work.
>>
>> The error I get is this:
>>
>> From the Media Setup Wizard when it gets to setup of TV Tuner:
>>
>> Critical Process Failure-
>> A Critical Media Center Process has failed. If the problem persists,
>> please
>> restart your machine and try again, or contact Technical Support CODE: 3
>>
>> Then from the Media Center Setup under TV Setup you get this message:
>>
>> Tuner Not Found-
>> The Tuner Hardware is either malfunctioning or not installed. Please
>> ensure
>> that both the tuner hardware and a valid tuner hardware driver are
>> installed.
>>
>> All other features seem to work for the media center, videos, pictures
>> and
>> music are all working, I did not try DVD's however.
>>
>> This is a nightmare, Where do we go from here?
>>
>> "Alan B" wrote:
>>
>> > I ran the rollup 2 and the update. I now have a problem with error code
>> > 3.
>> > when running the set up again MCE tells me that no tunner not installed
>> > or
>> > not working. I tried uninstalling back to rollup 1 but MCE will not
>> > start.
>> > With rollup 2 installed I can use most feature except live TV basically
>> > I get
>> > the error no tuner. It was fine this morning before the update, so I
>> > assume
>> > my tv tuner is there.
>> >
>> >
>> > Does anyone have any ideas as to what might have gone wrong. Also how
>> > do I
>> > install new tuner software. The device manager seems to think it is
>> > working
>> > fine.
>> >
>> > Alan