Cups problem

I am trying to configure a Brother hl-1440, on LBA Linux. At first
problem was that I was not getting any output from the printer usinf
foomatic driver, if I send a raw job it was printing, I have tried to
reinstall cups and it did not work, then I used one of the CD bootable
versions of linux to see if I have problem with cups and had same
story, them I updated system bios and cd boot version prints fine, but
my LBA linux still is not printing and gives me "Unable to create
temporary printer" error when trying to create one. I have looked at
the permissions on /var/spool/cups/tmp, set loggin to detai debug Here
is a little:
d [08/Oct/2004:15:07:45 +0100] POST /printers/
d [08/Oct/2004:15:07:45 +0100] CONTENT_TYPE = application/ipp
d [08/Oct/2004:15:07:45 +0100] ReadClient: 7 con->data_encoding =
length, con->data_remaining = 112, con->file = -1
d [08/Oct/2004:15:07:45 +0100] get_default(0x29f7ecbc[7])
d [08/Oct/2004:15:07:45 +0100] CheckPolicy: op=4001, name="anonymous",
authenticated=0, owner=""
d [08/Oct/2004:15:07:45 +0100] CheckPolicy: Returning 1...
D [08/Oct/2004:15:07:45 +0100] ProcessIPPRequest: 7 status_code=406
d [08/Oct/2004:15:07:45 +0100] ProcessIPPRequest: Adding fd 7 to
OutputSet...
d [08/Oct/2004:15:07:45 +0100] WriteClient: Removing fd 7 from
OutputSet...
d [08/Oct/2004:15:07:45 +0100] ReadClient: 7, used=0, file=-1
d [08/Oct/2004:15:07:45 +0100] ReadClient: httpGets returned EOF...
D [08/Oct/2004:15:07:45 +0100] CloseClient: 7
d [08/Oct/2004:15:07:45 +0100] CloseClient: Removing fd 7 from
InputSet and OutputSet...
Is there I can do anything besides reinstalling, btw it is probably
what I will do.
Al