More that 2800 Solutions manuals (Part 1)

List of Solutions Manual
_________________________



contact me to : mattosbw1 RemoveThis @gmail.com mattosbw1(at)
gmail.com



ot to : newbergh123 RemoveThis @yahoo.com newbergh123(at)
yahoo.com



..... try with both emails .




NOTE : "THIS SERVICE IS NOT AVAILABLE FOR : CHINA, INDIA, PAKISTAN,
IRAQ, IRAN, PHILIPPINES, NORTH KOREA, NEPAL, BANGLADESH, SRI LANKA,
MALDIVES & BHUTAN".





If your wanted solutions manual is not in this list, also can ask me
if is available (They are some only). Then if you need solutions
manual only contact me by email.



This same "list of titles" of texts with availables solutions manual
is for download from :








rapidshare.com/files/253185519/solvedpro.txt











I do not review the forums, just send me an email.






- Mechanics, Mechanical Engineering & Aerospace Engineering:
____________________________________________________________


Classical Mechanics (Douglas Gregory)
Advanced Dynamics (Donald T. Greenwood)
Principles of Dynamics (2nd Ed., Donald T. Greenwood)
Advanced Engineering Dynamics (2nd Ed., Jerry Ginsberg)
Classical Dynamics (Jorge V. José)
Impact Mechanics (W.J. Stronge)
Analytical Mechanics (7th Ed., Grant R. Fowles, George Cassiday)
Introduction to Mechanical Engineering (Rizza)
Engineering Fundamentals and Problem Solving (4th Ed., Eide, Jenison,
Mashaw & Northup)
Engineering Fundamentals and Problem Solving (5th Ed., Eide, Jenison,
Northup & Mickelson)
Mechanical Engineering Principles (Bird & Ross)
Dynamics of Mechanical Systems (C.T.F. Ross)
Mechanics of Solids (C.T.F. Ross)
Introduction to Engineering Analysis (1st Ed., Hagen)
Introduction to Engineering Analysis (2nd Ed., Hagen)
Introduction to Engineering Analysis (3rd Ed., Hagen)
Engineering Design (Rudolph J. Eggert)
Creative Design of Products and Systems (Saeed Niku)
Engineering Design (4th Ed., George Dieter & Linda Schmidt)
Engineering Design and Graphics with Autodesk Inventor 2009 (James
Bethune)
Engineering Design: A Project-Based Introduction (2nd Ed., Clive Dym &
Patrick Little)
Engineering Design: A Project-Based Introduction (3rd Ed., Clive Dym &
Patrick Little)
Tools and Tactics of Design (Dominick, Demel, Lawbaugh, Freuler,
Kinzel & Fromm)
Engineering Analysis in Applied Mechanics (John W Brewer)
Engineering Fluid Mechanics (William Graebel)
Advanced Fluid Mechanics (William Graebel)
Computational Fluid Dynamics : A Practical Approach (Jiyuan Tu, Guan
Heng Yeoh & Chaoqun Liu)
Mechanics of Fluids (8th Ed., Massey)
Fluid Mechanics (5th Ed., Frank White)
Fluid Mechanics (6th Ed., Frank White)
Viscous Fluid Flow (3rd Ed., Frank White)
Thermodynamics and Heat Power (6th Ed., Kurt C. Rolle)
Introduction to the Thermodynamics of Materials (4th Ed. David
Gaskell)
Engineering Thermodynamics: Work and Heat Transfer (4th Ed., G.F.C.
Rogers & Yon Mayhew)
Introduction to Thermodynamics and Heat Transfer (2nd Ed., Yunus
Cengel)
Fundamentals of Thermal-Fluid Sciences (1st Ed., Yunus Cengel)
Fundamentals of Thermal-Fluid Sciences (2nd Ed., Yunus Cengel)
Fundamentals of Thermal-Fluid Sciences (3rd Ed., Yunus Cengel & Robert
Turner)
Thermodynamics: An Engineering Approach (5th Ed., Yunus Cengel)
Thermodynamics: An Engineering Approach (6th Ed., Yunus Cengel)
Essentials of Fluid Mechanics: Fundamentals and Applications (1st Ed.,
Yunus Cengel, John Cimbala)
Fluid Mechanics (1st Ed., Yunus Cengel, John Cimbala)
Fluid Mechanics (2nd Ed., Yunus Cengel, John Cimbala)
Heat Tranfer (2nd Ed., Yunus Cengel)
Heat and Mass Transfer: A Practical Approach (3rd. Ed., Yunus Cengel)
Introduction to Fluid Mechanics (6th Ed., Robert Fox, Alan McDonald &
Philip Pritchard)
Introduction to Fluid Mechanics (7th Ed., Robert Fox, Philip Pritchard
& Alan McDonald)
Fluid Mechanics (5th Ed., Douglas)
Fluid Mechanics (3rd Ed., Kundu & Cohen)
Fluid Mechanics (4th Ed., Kundu & Cohen)
Elementary Fluid Mechanics (7th Ed., Street, Watters & Vennard)
Fluid Mechanics with Engineering Applications (10th Ed., Finnemore &
Franzini)
Fundamentals of Fluid Mechanics (4th Ed., Bruce Munson, Donald Young,
Theodore Okiishi)
Fundamentals of Fluid Mechanics (5th Ed., Bruce Munson, Donald Young,
Theodore Okiishi)
Fundamentals of Fluid Mechanics (6th Ed., Bruce Munson, Donald Young,
Theodore Okiishi, Wade Huebsch)
A Brief Introduction to Fluid Mechanics (3rd Ed., Donald Young, Bruce
Munson, Theodore Okiishi)
A Brief Introduction to Fluid Mechanics (4th Ed., Donald Young, Bruce
Munson, Theodore Okiishi, Wade Huebsch)
Engineering Fluid Mechanics (7th Ed., Clayton Crowe, Donald Elger,
John Roberson)
Engineering Fluid Mechanics (8th Ed., Clayton Crowe, Donald Elger,
John Roberson)
Engineering Fluid Mechanics (9th Ed., Clayton Crowe, Donald Elger,
John Roberson, Barbara Williams)
Fluid Mechanics (Potter & Foss)
Mechanics of Fluids (3rd Ed., Potter)
Fluid Power with Applications (7th Ed., Esposito)
Mechanics of Fluids (4th Ed., Shames)
Applied Fluid Mechanics (6th Ed., Mott)
Hydraulic Control Systems (Noah Manring)
Fluid Mechanics and Thermodynamics of Turbomachinery (5th Ed., S.L.
Dixon)
The Design of High-Efficiency Turbomachinery and Gas Turbines (2nd
Ed., David Gordon Wilson & Theododios Korakianitis)
Fundamentals of Turbomachinery (William Peng)
Principles of Turbomachinery in Air-Breathing Engines (Baskharone)
Fundamentals of Jet Propulsion with Applications (Ronald D. Flack)
Extended Irreversible Thermodynamics (3rd Ed., D. Jou, J. Casas-
Vazquez & G. Lebon)
Thermodynamics : An Integrated Learning System (Schmidt, Ezekoye,
Howell & Baker)
Design of Fluid Thermal Systems (2nd Ed., William Janna)
Design and Simulation of Thermal Systems (N.V. Suryanarayana & Oner
Arici)
Introduction to Thermal and Fluids Engineering (Kaminski & Jensen)
Heating, Ventilating and Air Conditioning Analysis and Design (6th
Ed., McQuiston)
Electricity, Electronics, and Control Systems for HVAC (4th Ed.,
Thomas Kissell)
Basic Heat and Mass Transfer (2nd Ed., by Mills)
Convective Heat and Mass Transfer (4th Ed., Kays & Crawford)
Advanced Engineering Thermodynamics (3rd Ed., Bejan)
Convection Heat Transfer (3rd Ed., Bejan)
Design with Constructal Theory (Adrian Bejan & Sylvie Lorente)
Shape and Structure, from Engineering to Nature (Adrian Bejan)
Thermodynamics : Concepts and Applications (Stephen Turns)
Heat Transfer (10th Ed., Jack Holman)
Principles of Heat Transfer (Kaviany)
Heat Convection (Latif M. Jiji)
Fundamentals of Momentum, Heat and Mass Transfer (5th Ed., Welty)
Analytical Methods for Heat Transfer and Fluid Flow Problems (Bernhard
Weigand)
Two-Phase Flow : Theory and Applications (Clement Kleinstreuer)
Convective Heat Transfer (kakac)
An Introduction to Mass and Heat Transfer: Principles of Analysis and
Design (Stanley Middleman)
Fundamentals of Thermodynamics (5th Ed., Richard Sonntag, Claus
Borgnakke & Gordon Van Wylen)
Fundamentals of Thermodynamics (6th Ed., Richard Sonntag, Claus
Borgnakke & Gordon Van Wylen)
Fundamentals of Thermodynamics (7th Ed., Claus Borgnakke & Richard
Sonntag)
Introduction to Engineering Thermodynamics (1st Ed., Richard Sonntag &
Claus Borgnakke)
Introduction to Engineering Thermodynamics (2nd Ed., Richard Sonntag &
Claus Borgnakke)
Fundamentals of Engineering Thermodynamics (5th Ed., Michael Moran,
Howard Shapiro)
Fundamentals of Engineering Thermodynamics (6th Ed., Michael Moran,
Howard Shapiro)
Fundamentals of Heat and Mass Transfer (5th Ed., Incropera, DeWitt)
Fundamentals of Heat and Mass Transfer (6th Ed., Incropera, DeWitt)
Introduction to Heat Transfer (4th Ed., Incropera, DeWitt)
Introduction to Heat Transfer (5th Ed., Incropera, DeWitt)
Radiation Detection and Measurement (3rd Ed., Glenn Knoll)
Radiative Heat Transfer (2nd Ed., Michael Modest)
Computational Heat Transfer (2nd Ed., Jaluria)
Principles of Combustion (2nd Ed., Kenneth Kuan-yun Kuo)
Combustion (2nd Ed., Irvin Glassman)
Combustion (3rd Ed., Irvin Glassman)
Incompressible Flow (3rd Ed., Panton)
Modern Compressible Flow: With Historical Perspective (3rd Ed., John
Anderson)
Non-Newtonian Flow : Fundamentals and Engineering Applications (R.P.
Chhabra & J F Richardson)
Computational Techniques for Fluid Dynamics (Srinivas, K., Fletcher,
C.A.J.)
Introduction to Computational Fluid Dynamics (A.W. Date)
Robot Modeling and Control (Spong, Hutchinson & Vidyasagar)
Theory of Applied Robotics : Kinematics, Dynamics and Control (Reza N.
Jazar)
Control of Robot Manipulators in Joint Space (R. Kelly, V. Santibáñez,
A. Loría)
Modelling and Control of Robot Manipulators (2nd Ed., Lorenzo
Sciavicco, Bruno Siciliano)
Robotics: Modelling, Planning and Control (Bruno Siciliano, Lorenzo
Sciavicco, Luigi Villani & Giuseppe Oriolo)
Fundamentals of Robotic Mechanical Systems: Theory, Methods, and
Algorithms (3rd Ed., Jorge Angeles)
Kinematic Chains and Machine Components Design (Dan B. Marghitu)
Kinematics, Dynamics, and Design of Machinery (2nd Ed., Waldron &
Kinzel)
Machines and Mechanisms : Applied Kinematic Analysis (3rd Ed.,
Myszka)
Mechanism Design : Analysis and Synthesis (4th Ed., Erdman, Sandor &
Kota)
Mechanical Design : A Components Approach (Peter Childs)
Mechanical Design of Machine Elements and Machines: A Failure
Prevention Perspective (Collins)
Fundamentals of Machine Component Design (3rd Ed., Juvinall)
Fundamentals of Machine Component Design (4th Ed., Juvinall)
Design of Machine Elements (8th Ed., Spotts)
Solutions Manual to the text : "Problems on the Design of Machine
Elements" (Faires)
Machine Elements in Mechanical Design (4th Ed., Mott)
Mechanical Design : An Integrated Approach (1st Ed., Ansel Ugural)
Design of Machinery (3rd Ed., Norton)
Design of Machinery (4th Ed., Norton)
Machine Design : An Integrated Approach (3rd Ed., Norton)
Mechanical Engineering Design (6th Ed., Shigley)
Mechanical Engineering Design (7th Ed., Shigley)
Shigley's Mechanical Engineering Design (8th Ed., Budynas)
Fundamentals of Machine Elements (1st Ed., Hamrock)
Fundamentals of Machine Elements (2nd Ed., Hamrock)
Mechanics of Materials : A Modern Integration of Mechanics and
Materials in Structural Design (Christopher Jenkins & Sanjeev Khanna)
Mechanics of Materials (3th Ed., Beer)
Mechanics of Materials (5th Ed., Gere & Timoshenko)
Mechanics of Materials (6th Ed., Gere & Timoshenko)
Mechanics of Materials (7th Ed., Gere & Goodno)
Mechanics of Materials (Ansel Ugural)
Mechanics of Materials : An Integrated Learning System (Philpot &
Missouri)
Mechanics of Materials (2nd Ed., Roy R. Craig)
Simplified Mechanics and Strength of Materials (6th Ed., James
Ambrose)
Engineering Applications of Dynamics (Dean Karnopp & Donald Margolis)
Engineering Mechanics : Statics (Arthur Boresi, Richard Schmidt)
Engineering Mechanics : Dynamics (Arthur Boresi, Richard Schmidt)
Engineering Mechanics : Statics (5th Ed., J. L. Meriam, L. G. Kraige)
Engineering Mechanics : Statics - SI Version (5th Ed., J. L. Meriam,
L. G. Kraige)
Engineering Mechanics : Statics (6th Ed., J. L. Meriam, L. G. Kraige)
Engineering Mechanics : Statics - SI Version (6th Ed., J. L. Meriam,
L. G. Kraige)
Engineering Mechanics : Dynamics (5th Ed., J. L. Meriam, L. G. Kraige)
Engineering Mechanics : Dynamics - SI Version (5th Ed., J. L. Meriam,
L. G. Kraige)
Engineering Mechanics : Dynamics (6th Ed., J. L. Meriam, L. G. Kraige)
Engineering Mechanics : Dynamics - SI Version (6th Ed., J. L. Meriam,
L. G. Kraige)
Vector Mechanics for Engineers : Statics (7th Ed., Ferdinand Beer)
Vector Mechanics for Engineers : Statics (8th Ed., Ferdinand Beer)
Vector Mechanics for Engineers : Dynamics (7th Ed., Ferdinand Beer)
Vector Mechanics for Engineers : Dynamics (8th Ed., Ferdinand Beer)
Statics : Analysis and Design of Systems in Equilibrium (Sheppard &
Tongue)
Statics : Analysis and Design of Systems in Equilibrium - Update
Edition (Sheppard & Tongue)
Dynamics : Analysis and Design of Systems in Motion (Sheppard &
Tongue)
Statics and Mechanics of Materials: An Integrated Approach (2nd Ed.,
Riley, Sturges & Morris)
Mechanics of Materials (6th Ed., Riley, Sturges & Morris)
Basic Engineering Plasticity: An Introduction with Engineering and
Manufacturing Applications (David Rees)
Theory of Plasticity (3rd Ed. Jagabanduhu Chakrabarty)
Deformation and Fracture Mechanics of Engineering Materials (4th Ed.,
Richard Hertzberg)
Deformable Bodies and Their Material Behavior (Haslach & Armstrong)
Intermediate Mechanics of Materials, (1st Ed., Barber)
Elasticity (2nd Ed., J.R. Barber)
Elasticity: Theory, Applications, and Numerics (1st Ed., Martin Sadd)
Elasticity: Theory, Applications, and Numerics (2nd Ed., Martin Sadd)
Elasticity in Engineering Mechanics (2nd Ed., Boresi)
Advanced Mechanics of Materials (6th Ed., Boresi)
Metal Fatigue in Engineering (2nd Ed., Stephens, Fatemi & Fuchs)
Applied Mechanics for Engineering Technology (8th Ed., Keith M.
Walker)
Applied Statics and Strength of Materials (5th Ed. Limbrunner &
Spiegel)
Statics and Strength of Materials (Robert Mott)
Applied Strength of Materials (4th Ed., Mott)
Applied Strength of Materials (5th Ed., Mott)
Intermediate Dynamics for Engineers (Marcelo R.M & Crespo da Silva)
Engineering Mechanics : Statics (4th Ed., Anthony Bedford & Wallace
Fowler)
Engineering Mechanics : Statics (5th Ed., Anthony Bedford & Wallace
Fowler)
Engineering Mechanics : Dynamics (4th Ed., Anthony Bedford & Wallace
Fowler)
Engineering Mechanics : Dynamics (5th Ed., Anthony Bedford & Wallace
Fowler)
Elastic And Inelastic Stress Analysis (Shames)
Thermal Stresses (2nd Ed., Noda, Hetnarski & Tanigawa)
Strength of Materials - A New Unified Theory for the 21st Century
(Surya Patnaik & Dale Hopkins)
Statics and Strengths of Materials (6th Ed., Morrow & Kokernak)
Principles of Statics (10th Ed., Hibbeler)
Principles of Dynamics (10th Ed., Hibbeler)
Engineering Mechanics : Statics (11th Ed., Hibbeler)
Engineering Mechanics : Statics (12th Ed., Hibbeler)
Engineering Mechanics : Dynamics (11th Ed., Hibbeler)
Engineering Mechanics : Dynamics (12th Ed., Hibbeler)
Mechanics of Materials (4th Ed, Hibbeler)
Mechanics of Materials (6th Ed, Hibbeler)
Mechanics of Materials (7th Ed, Hibbeler)
Statics and Mechanics of Materials (Bedford, Liechti & Fowler)
Statics and Mechanics of Materials (2nd Ed., Hibbeler)
Energy Principles and Variational Methods in Applied Mechanics (2nd
Ed., Reddy)
The Physics of Vibrations and Waves (6th Ed., Pain)
Engineering Vibrations (3rd Ed., Inman)
Theory of Vibration: An Introduction (2nd Ed., A.A. Shabana)
Vibration of Discrete and Continuous Systems (2nd Ed., Ahmed Shabana)
Introduction to Finite Element Vibration Analysis (Maurice Petyt)
Vibrations and Stability : Advanced Theory, Analysis, and Tools (2nd
Ed., Jon J. Thomsen)
Dynamics and Vibration: An Introduction (Magd Abdel Wahab)
Mechanical Vibration (William J. Palm, III)
Random Vibrations : Analysis of Structural and Mechanical Systems
(Loren Lutes & Shahram Sarkani)
Mechanical and Structural Vibrations : Theory and Applications (by
Jerry H. Ginsberg)
Fundamentals of Structural Integrity : Damage Tolerant Design and
Nondestructive Evaluation (Alten F. Grandt)
A First Course in the Finite Element Method (4th Ed., Daryl L. Logan)
Finite Element Analysis Theory and Application with ANSYS (3rd Ed.,
Moaveni)
An Introduction to the Finite Element Method (3rd Ed., J. N. Reddy)
Fundamentals of Finite Element Analysis (1st Ed., David V. Hutton)
The Finite Element Method in Engineering (4th Ed., Rao)
The Finite Element Method and Applications in Engineering Using ANSYS
(Madenci & Guven)
Introduction to Finite Element Analysis and Design (Nam-Ho Kim,
Bhavani V. Sankar)
Introduction to the Finite Element Method: Theory, Programming and
Applications (Erik G. Thompson)
The Finite Element Method : Its Basis and Fundamentals (6th Ed.,
Zienkiewicz, R. L. Taylor & J.Z. Zhu)
Fundamental Finite Element Analysis and Applications: with Mathematica
and Matlab Computations (Asghar Bhatti)
Advanced Topics in Finite Element Analysis of Structures: With
Mathematica and MATLAB Computations (Asghar Bhatti)
Modeling and Analysis of Dynamic Systems (3rd Ed., Close)
System Dynamics (1st Ed., William J Palm III)
System Dynamics (2nd Ed., William J Palm III)
System Dynamics and Response (S. Graham Kelly)
Dynamic Modeling and Control of Engineering Systems (2nd Ed., J. Lowen
Shearer, Bohdan Kulakowski, John Gardner)
System Dynamics : Modeling and Simulation of Mechatronic Systems (4th
Ed., Karnopp, Margolis & Rosenberg)
Concepts and Applications of Finite Element Analysis (4th Ed., Cook,
Malkus, Plesha & Witt)
Finite Element Modeling for Stress Analysis (Robert Cook)
Fracture Mechanics : An Introduction (2nd Ed., by E.E. Gdoutos)
Fracture Mechanics : Fundamentals and Applications (2nd Ed., T.L.
Anderson)
Mechanical Behavior of Materials (3rd Ed. Dowling)
Mechanical Behavior of Materials (W.F. Hosford)
Mechanical Behavior of Materials (Keith Bowman)
Theory and Design for Mechanical Measurements (4th Ed, Figliola &
Beasley)
Mechanical Measurements (6th Ed., Beckwith, Marangoni & Lienhard)
Measurement and Data Analysis for Engineering and Science (Patrick
Dunn)
Design and Analysis of Lean Production Systems (Askin & Goldberg)
Work Systems: The Methods, Measurement & Management of Work (Mikell P.
Groover)
Automation, Production Systems, and Computer-Integrated Manufacturing
(2nd Ed., Groover)
Automation, Production Systems, and Computer-Integrated Manufacturing
(3rd Ed., Groover)
Fundamentals of Modern Manufacturing: Materials, Processes, and
Systems (3rd Ed., Mikell P. Groover)
Materials and Processes in Manufacturing (9th Ed., E. Paul DeGarmo, J.
T. Black, Ronald A. Kohser)
DeGarmo's Materials and Processes in Manufacturing (10th Ed., E. Paul
DeGarmo, J. T. Black, Ronald A. Kohser)
Principles of Metal Manufacturing Processes (Beddoes & Bibby)
Design for Manufacturing: A Structured Approach (Corrado Poli)
Fundamentals of Manufacturing (2nd Ed., Philip D. Rufe)
Materials Selection in Mechanical Design (3rd Ed., Michael Ashby)
Materials Science for Engineering Students (Traugott Fischer)
Manufacturing Facilities Design and Material Handling (3rd Ed., Meyers
& Stephens)
Manufacturing Facilities Design and Material Handling (4th Ed.,
Stephens & Meyers)
Manufacturing Processes for Engineering Materials (5th Ed. Kalpakjian
& Smith)
Manufacturing, Engineering & Technology (5th Ed. Kalpakjian & Smith)
Manufacturing, Engineering & Technology (6th Ed. Kalpakjian & Smith)
Applied Manufacturing Process Planning: With Emphasis on Metal Forming
and Machining (Nelson, Schneider)
Mastering CAD/CAM (1st Ed., Ibrahim Zeid)
Computer Numerical Control : Operation and Programming (3rd Ed.,
Stenerson & Curran)
Introduction to Computer Numerical Control (4th Ed., Valentino &
Goldenberg)
Linear State-Space Control Systems (Robert L. Williams, II & Douglas
A. Lawrence)
Gas Turbine Theory (6th Ed., H.I.H. Saravanamuttoo, G.F.C. Rogers, H.
Cohen & Paul Straznicky)
Rocket Propulsion Elements (7th Ed., George P. Sutton & Oscar Biblarz)
Orbital Mechanics for Engineering Students (Howard Curtis)
Atmospheric and Space Flight Dynamics: Modeling and Simulation with
MATLAB and Simulink (Ashish Tewari)
Flight Dynamics Principles (2nd Ed., by Cook)
Mechanics of Flight (Warren F. Phillips)
Fundamentals of Airplane Flight Mechanics (David G. Hull)
Dynamics of Flight: Stability and Control (3rd Ed., Bernard Etkin &
Lloyd Duff Reid)
Aircraft Rescue and Firefighting (5th Ed., IFSTA)
Aircraft Propulsion (Saeed Farokhi)
Aircraft Performance (Maido Saarlas)
Flight Performance of Fixed and Rotary Wing Aircraft (Antonio
Filippone)
Aircraft Control and Simulation (2nd Ed., Brian Stevens & Frank Lewis)
Aircraft Structures for Engineering Students (3rd Ed., T.H.G. Megson)
Aircraft Structures for Engineering Students (4th Ed., T.H.G. Megson)
Mechanics of Aircraft Structures (2nd Ed, C. T. Sun)
Principles of Helicopter Aerodynamics (1st Ed., Leishman)
Interactive Aerospace Engineering and Design (Dava Newman)
Fundamentals of Aerodynamics (2nd Ed., Anderson)
Fundamentals of Aerodynamics (3th Ed., Anderson)
Fundamentals of Aerodynamics (4th Ed., Anderson)
Aerodynamics for Engineers (5th Ed., John Bertin & Russell Cummings)
Introduction to Flight (5th Ed., Anderson)
Introduction to Flight (6th Ed., Anderson)
Mechatronics: Principles and Applications (Godfrey Onwubolu)
Mechatronics (Sabri Cetinkunt)
Introduction to Mechatronics and Measurement Systems (2nd Ed., David
Alciatore & Michael Histand)
Introduction to Mechatronics and Measurement Systems (3rd Ed., David
Alciatore & Michael Histand)
Introduction to Engineering Experimentation (2nd Ed., Wheeler & Ganji)
Gas Dynamics (3rd Ed., John & Keith)
Fundamentals of Gas Dynamics (2nd Ed, Robert D. Zucker)
Theory of Ground Vehicles (3rd Ed., J. Y. Wong)
Theory of Ground Vehicles (4th Ed., J. Y. Wong)
Vehicle Dynamics : Theory and Application (Reza Jazar)
Internal Combustion Engines : Applied Thermosciences (2nd Ed.,
Ferguson & Kirkpatrick)
Advanced Engine Performance Diagnosis (4th Ed., James Halderman)
Automotive Engines (8th Ed., Crouse)
Automotive Heating & Air Conditioning (5th Ed., Tom Birch)
Diagnosis and Troubleshooting of Automotive Electrical, Electronic,
and Computer Systems (5th Ed., James Halderman)
Automotive Brake Systems Package (4th Ed., Rehkopf)
Automotive Brake Systems (4th Ed., Halderman)
Automotive Engine Performance (2nd Ed., Halderman)
Automotive Engines : Theory and Servicing (6th Ed., James Halderman)
Automotive Fuel and Emissions Control Systems (2nd Ed., James
Halderman & James Linder)
Automotive Science and Mathematics (Allan Bonnick)
Automotive Mathematics (Jason C. Rouvel)
Automotive Service Management (Andrew Rezin)
Automotive Technology : Principles, Diagnosis, and Service (3rd Ed.,
Halderman)
Automotive Steering, Suspension, and Alignment (4th Ed., Halderman)
Automatic Transmissions & Transaxles (4th Ed., Tom Birch & Chuck
Rockwood)
Hybrid and Alternative Fuel Vehicles (Halderman & Martin)
Manual Drivetrains and Axles (5th Ed., Birch & Rockwood)
Blueprint Reading for the Machine Trades (6th Ed., Schultz & Smith)
Modern Welding Technology (6th Ed., Cary & Helzer)
Tissue Engineering (Clemens van Blitterswijk, et al.)
Tissue Mechanics (Cowin, Doty)
Technology and Society (3rd Ed., Hjorth, Eichler, Khan & Morello)
BTEC First Engineering Curriculum Support Pack (Mike Tooley)
BTEC First Engineering (Mike Tooley)
Exploring Engineering (Philip Kosky, George Wise, Robert Balmer &
William Keat)
Engineering Science (5th Ed., W. Bolton)
Principles of Energy Conversion (2nd Ed., Archie W. Culp)
Fundamentals of Renewable Energy Processes (1st Ed., Aldo da Rosa)
Fundamentals of Renewable Energy Processes (2nd Ed., Aldo da Rosa)
Renewable Energy (3rd Ed., Sørensen or Sorensen)
Energy Technology and Directions for the Future (Fanchi)
Power Generation Technologies (Paul Breeze)
Concepts in Engineering (Holtzapple & Reece)
Concepts in Engineering (2nd Ed., Holtzapple & Reece)
Foundations of Engineering (2nd Ed, Holtzapple & Dan Reece)
Industrial Mechanics and Maintenance (3rd Ed., Larry Chastain)
Mechanical and Electrical Equipment for Buildings (10th Ed., Stein,
Reynolds, Grondzik, Kwok)
Mechanical & Electrical Systems in Buildings (4th Ed., Richard Janis &
William Tao)
Engineering Drawing And Design (7th Ed., Jensen, Helsel & Short)
Autodesk Inventor (James M. Leake)
Orthopaedic Biomechanics : Mechanics and Design in Musculoskeletal
Systems (Donald L. Bartel, Dwight T. Davy & Tony M. Keaveny)
Science for Engineering (3rd Ed., John Bird)




- Electrical, Electronics & Computer Engineering :
__________________________________________________


Design for Electrical and Computer Engineers (J. Eric Salt & Robert
Rothery)
Electrical Engineering : Principles and Applications (3rd Ed.,
Hambley)
Electrical Engineering : Principles and Applications (4th Ed.,
Hambley)
Electronics (2nd Ed., Hambley)
Cryptography & Network Security (Behrouz A Forouzan)
Data Communications and Networking (3rd Ed., Behrouz A. Forouzan)
Data Communications and Networking (4th Ed., Behrouz A. Forouzan)
TCP/IP Protocol Suite (2nd Ed., Behrouz Forouzan)
TCP/IP Protocol Suite (3rd Ed., Behrouz Forouzan)
Local Area Networks (Behrouz A Forouzan)
Satellite Communications (2nd Ed, Pratt, Bostian, Allnutt)
Business Data Communications (Behrouz A Forouzan)
Logic and Computer Design Fundamentals (4th Ed., Mano & Kime)
Linear Robust Control (Michael Green, David J. N. Limebeer)
Adaptive Control (2nd Ed., Karl Johan Astrom, Bjorn Wittenmark)
Digital Control Engineering : Analysis and Design (M. Sami Fadali &
Antonio Visioli)
Computer-Controlled Systems: Theory and Design (3rd Ed., Karl Johan
Astrom & Bjorn Wittenmark)
Electric Circuits (7th Ed., Nilsson & Riedel)
Electric Circuits (8th Ed., Nilsson & Riedel)
Introductory Circuits for Electrical and Computer Engineering (James
W. Nilsson, Susan A. Riedel)
Applied Electromagnetics : Early Transmission Lines Approach (Stuart
M. Wentworth)
Fundamentals of Electromagnetics with Engineering Applications (Stuart
M. Wentworth)
Electromagnetics for Engineers : With Applications to Digital Systems
and Electromagnetic Interference (Clayton R. Paul)
MEMS & Microsystems : Design, Manufacture, and Nanoscale Engineering
(2nd Ed., Tai-Ran Hsu)
Probability and Statistics for Engineering and the Sciences (7th Ed.,
Jay L. DeVore)
Probability and Stochastic Processes: A Friendly Introduction for
Electrical and Computer Engineers (2nd Ed., Roy Yates & David Goodman)
Process Systems Analysis and Control (3rd Ed. Donald Coughanowr,
Steven LeBlanc)
Fuel Cell Fundamentals (1st Ed., Ryan O'Hayre, et. al)
Fuel Cell Fundamentals (2nd Ed., Ryan O'Hayre, Whitney Colella, Suk-
Won Cha, Fritz Prinz)
Control Systems Engineering (4th Ed., Norman Nise)
Control Systems Engineering (5th Ed., Norman Nise)
Automatic Control Systems (8th Ed., Benjamin C. Kuo, Farid Golnaraghi)
Basic Engineering Circuit Analysis (8th Ed., Irwin & Nelms)
Basic Engineering Circuit Analysis (9th Ed., Irwin & Nelms)
A Brief Introduction to Circuit Analysis (J. David Irwin)
Semiconductor Devices : Basic Principles (Jasprit Singh)
Semiconductor Device Fundamentals (Robert F. Pierret)
Device Electronics for Integrated Circuits (3rd Ed., Richard S.
Muller, Theodore I. Kamins)
Fundamentals of Semiconductor Devices (Anderson)
Scientific Computing (2nd Ed., Michael T. Heath)
Pattern Recognition and Machine Learning (Christopher M. Bishop)
Modern Semiconductor Devices for Integrated Circuits (Chenming C. Hu)
Analysis and Design of Analog Integrated Circuits (4th Ed., Paul Gray,
et al.)
Analysis and Design of Analog Integrated Circuits (5th Ed., Paul Gray)
Analysis and Design of Digital Integrated Circuits (3rd Ed., Hodges)
Introduction to Electric Circuits (6th Ed., Dorf & Svoboda)
Introduction to Electric Circuits (7th Ed., Dorf & Svoboda)
Modulation, Detection and Coding (Tommy Öberg)
Principles of Communications: Systems, Modulation, and Noise (5th Ed.,
R.E. Ziemer & W.H. Tranter)
Principles of Communications (6th Ed., R.E. Ziemer & W.H. Tranter)
The Analysis and Design of Linear Circuits (4th Ed, Thomas & Rosa)
The Analysis and Design of Linear Circuits : Laplace Early (4th Ed,
Thomas & Rosa)
The Analysis and Design of Linear Circuits (5th Ed, Thomas)
The Analysis and Design of Linear Circuits (6th Ed, Thomas, Rosa &
Toussaint)
Dynamic Modeling and Control of Engineering Systems (2nd Ed., J. Lowen
Shearer, Bohdan Kulakowski, John Gardner)
Modern Control Systems (11th Ed., Dorf)
System Dynamics (1st Ed., William Palm III)
System Dynamics (2nd Ed., William Palm III)
System Dynamics and Response (S. Graham Kelly)
Optimal Control (2nd Ed., Frank Lewis & Vassilis Syrmos)
Optimal Control Theory : An Introduction (Donald E. Kirk)
Intuitive Probability and Random Processes using MATLAB (Steven Kay)
Analog Signals and Systems (Erhan Kudeki & David C. Munson, Jr.)
Continuous and Discrete Time Signals and Systems (Mrinal Mandal, Amir
Asif)
Digital Signal and Image Processing (Tamal Bose)
Digital Image Processing (2nd Ed., Rafael C. Gonzalez, Richard E.
Woods)
Discrete-Time Signal Processing (2nd Ed., Alan V. Oppenheim, Ronald W.
Schafer, John R. Buck)
Signal Processing First (James H. McClellan, Ronald W. Schafer, Mark
A. Yoder)
Statistical Digital Signal Processing and Modeling (Monson Hayes)
Digital Signal Processing (Thomas J. Cavicchi)
Digital Signal Processing System Design: LabVIEW-Based Hybrid
Programming (2nd Ed., Kehtarnavaz)
Digital Signal Processing (2nd Ed., Mitra)
Digital Signal Processing (3rd Ed., Mitra)
Digital Signal Processing (4th Ed., John G. Proakis, Dimitris K
Manolakis)
Digital Signal Processing (Charles Schuler & Mahesh Chugani)
Digital Signal Processing : Fundamentals and Applications (Li Tan)
Digital Signal Processing : An Experimental Approach (Shlomo
Engelberg)
Digital Signal Processing : System Analysis and Design (Paulo S. R.
Diniz)
Digital Signal Processing : A Modern Introduction (Ashok Ambardar)
Adaptive Filtering: Algorithms and Practical Implementation (3rd Ed.,
Paulo S. R. Diniz)
Introduction to Scientific Computation and Programming (Daniel T.
kaplan)
Principles of Signal Detection and Parameter Estimation (Bernard C.
Levy)
Electric Machines Analysis and Design Applying MatLab (Cathey)
Fundamentals of Electrical Engineering (Giorgio Rizzoni)
Principles and Applications of Electrical Engineering (4th Ed,
Rizzoni)
Principles and Applications of Electrical Engineering (5th Ed,
Rizzoni)
Fundamentals of Electric Circuits (2nd Ed., Alexander & Sadiku)
Fundamentals of Electric Circuits (3rd Ed., Alexander & Sadiku)
Fundamentals of Electric Circuits (4th Ed., Alexander & Sadiku)
MSP430 Microcontroller Basics (John Davies)
Embedded DSP Processor Design : Application Specific Instruction Set
Processors (Dake Liu)
Embedded Microcontrollers and Processor Design (Charles Greg Osborn)
Embedded System Design : A Unified Hardware/Software Introduction
(Vahid & Givargis)
Embedded Microcomputer Systems: Real Time Interfacing (2nd Ed.,
Jonathan W. Valvano)
Digital Design (Frank Vahid)
Digital Logic Design Principles (Balabanian & Carlson)
Fundamentals of Logic Design (5th Ed., Charles H. Roth)
Real-Time Systems and Software (Alan Shaw)
Introduction to VLSI Circuits and Systems (John P. Uyemura)
Chip Design for Submicron VLSI: CMOS Layout & Simulation (John P.
Uyemura)
Classical Electrodynamics (2nd Ed., John David Jackson)
Objects, Abstraction, Data Structures and Design: Using C++ (Elliot B.
Koffman & Paul A. T. Wolfgang)
Objects, Abstraction, Data Structures and Design Using Java Version
5.0 (Elliot B. Koffman & Paul A. T. Wolfgang)
Computer Architecture and Organization: An Integrated Approach
(Murdocca & Heuring)
Wiley Pathways Networking Basics (1st Ed., Ciccarelli, Faulkner,
FitzGerald, Dennis & Miller)
Software Engineering: Principles and Practice (3rd Ed., Hans van
Vliet)
Software Design: From Programming to Architecture (Eric Braude)
Software Engineering : An Object-Oriented Perspective (Eric Braude)
Neural and Adaptive Systems: Fundamentals through Simulations (José
Principe, Neil Euliano & W. Curt Lefebvre)
Fundamentals of Electronic Circuit Design (David J. Comer (Author),
Donald T. Comer)
Microelectronic Circuit Design (2nd Ed., Jaeger & Blalock)
Microelectronic Circuit Design (3rd Ed., Jaeger & Blalock)
Introduction to Microelectronic Fabrication: Volume 5 of Modular
Series on Solid State Devices (2nd Ed., Richard Jaeger)
Microelectronic Circuits (5th Ed., Adel S. Sedra, K. C. Smith)
VHDL for Engineers (Kenneth Short)
Fundamentals of Digital Logic with VHDL Design (1st Ed., Brown &
Vranesic)
Fundamentals of Digital Logic with VHDL Design (2nd Ed., Brown &
Vranesic)
Fundamentals of Digital Logic with VHDL Design (3rd Ed., Brown &
Vranesic)
CMOS Analog Circuit Design (2nd Ed., Phillip E. Allen, Douglas R.
Holberg)
Design of Analog CMOS Integrated Circuits (Behzad Razavi)
Design of Integrated Circuits for Optical Communications (Behzad
Razavi)
Fundamentals of Microelectronics, Preliminary Edition (Behzad Razavi)
Fundamentals of Microelectronics (1st Ed., Behzad Razavi)
Design with Operational Amplifiers and Analog Integrated Circuits (3rd
Ed., Sergio Franco)
Your UNIX: The Ultimate Guide (1st Ed., Sumitabha Das)
Your UNIX: The Ultimate Guide (2nd Ed., Sumitabha Das)
Microwave Engineering (Annapurna Das)
Microwave Engineering (3rd Ed., David M. Pozar)
Microwave and RF Design of Wireless Systems (David M. Pozar)
Introduction to Wireless Systems (P. M. Shankar)
Microwave Transistor Amplifiers : Analysis and Design (2nd Ed.,
Guillermo Gonzalez)
Control Systems (Madan Gopal)
A First Lab in Circuits and Electronics (Yannis Tsividis)
Power Electronic Circuits (Issa Batarseh)
Power System Analysis : Analysis and Design (John Grainger)
Power Systems Analysis (2nd Ed., Hadi Saadat)
Power Systems Analysis and Design (4th Ed., J.Duncan Glover and
Mulukutla S. Sarma)
Power Electronics : Converters, Applications, and Design (3rd Ed., Ned
Mohan, Tore Undeland & William Robbins)
An Introduction to Digital and Analog Communications (2nd Ed., Simon
Haykin & Michael Moher)
Communication Systems (4th Ed., Simon Haykin)
Communication Systems (5th Ed., Simon Haykin)
Communication Systems (4th Ed., A. Bruce Carlson, Paul B. Crilly,
Janet Rutledge)
Communication Systems (5th Ed., A. Bruce Carlson, Paul B. Crilly)
Signals and Systems (2nd Ed., Simon Haykin & Barry Van Veen)
Introduction to Computing Systems : From bits & gates to C & beyond
(1st Ed., Patt and Patel)
Introduction to Computing Systems : From bits & gates to C & beyond
(2nd Ed., Patt and Patel)
Introduction to Languages and the Theory of Computation (3rd Ed., John
Martin)
Mechanical & Electrical Systems in Buildings (4th Ed., Richard Janis &
William Tao)
Silicon VLSI Technology : Fundamentals, Practice, and Modeling
(Plummer, Deal & Griffin)
Engineering Electromagnetics (2nd Ed., Nathan Ida)
Engineering Electromagnetics (Kenneth Demarest)
Field and Wave Electromagnetics (2nd Ed., David Cheng)
Fundamentals of Engineering Electromagnetics (David Cheng)
Intuitive Probability and Random Processes using MATLAB (Steven Kay)
Information Modeling and Relational Databases (2nd Ed., Terry Halpin &
Tony Morgan)
Probability, Statistics, and Random Processes For Electrical
Engineering (3rd Ed., Alberto Leon-Garcia)
Detection and Estimation Theory (Thomas Schonhoff & Arthur Giordano)
The Intel Microprocessors (8th Ed., Barry B. Brey)
Wireless Networking (Kumar, Manjunath & Kuri)
Wireless Communications : Principles and Practice (2nd Ed., Theodore
S. Rappaport)
Digital Electronics and Design with VHDL (Volnei A. Pedroni)
System-on-Chip Test Architectures: Nanometer Design for Testability
(Wang, Stroud & Touba)
Digital Design (Verilog) : An Embedded Systems Approach Using Verilog
(Peter Ashenden)
Digital Design (VHDL) : An Embedded Systems Approach Using VHDL (Peter
Ashenden)
Computer Organization and Design: The Hardware/Software Interface (3rd
Ed., Patterson & Hennessy)
Computer Organization and Design: The Hardware/Software Interface (4th
Ed., Patterson & Hennessy)
Fundamentals of Computer Organization and Design (Sivarama P.
Dandamudi)
Wireless Communications & Networking (Vijay Garg)
Network Flows : Theory, Algorithms, and Applications (Ravindra K.
Ahuja, Thomas L. Magnanti, James B. Orlin)
Network Analysis, Architecture, and Design (3rd Ed., James McCabe)
Computer Networks : A Systems Approach (4th Ed., Peterson & Davie)
Computer Networks ISE : A Systems Approach (4th Ed., Peterson & Davie)
Digital Design and Computer Architecture (David Harris & Sarah Harris)
Fault-Tolerant Systems (Israel Koren & C. Krishna)
Computer Architecture : Pipelined and Parallel Processor Design
(Michael J. Flynn)
Computer Architecture : A Quantitative Approach (4th Ed., Hennessy &
Patterson)
High-Performance Embedded Computing : Architectures, Applications, and
Methodologies (Wayne Wolf)
Pattern Recognition (3rd Ed., Theodoridis & Koutroumbas)
Pattern Recognition (4th Ed., Theodoridis & Koutroumbas)
Data Mining: Concepts and Techniques (2nd Ed., Han & Kamber)
Commonsense Reasoning (Erik Mueller)
Introduction to Data Compression (3rd Ed., Khalid Sayood)
Programming Language Pragmatics (2nd Ed., Michael Scott)
Programming Language Pragmatics (3rd Ed., Michael Scott)
Computer Graphics for Java Programmers (2nd Ed., Leen Ammeraal & Kang
Zhang)
Database Modeling and Design: Logical Design (4th Ed., Teorey,
Lightstone & Nadeau)
Computers As Components: Principles of Embedded Computing System
Design (2nd Ed., Wayne Wolf)
Virtual Machines : Versatile Platforms for Systems and Processes (Jim
Smith & Ravi Nair)
Comprehensive Functional Verification: The Complete Industry Cycle
(Wile, Goss & Roesner)
User Interface Design and Evaluation (Stone, Jarrett, Woodroffe &
Minocha)
Network Algorithmics: An Interdisciplinary Approach to Designing Fast
Networked Devices (George Varghese)
Data Modeling Essentials (3rd Ed., Simsion & Witt)
A Student Guide to Object-Oriented Development (Carol Britton & Jill
Doake)
Routing, Flow, and Capacity Design in Communication and Computer
Networks (Pioro & Medhi)
Knowledge Representation and Reasoning (Brachman & Levesque)
Communication Networking : An Analytical Approach (Anurag Kumar, D.
Manjunath & Joy Kuri)
Principles and Practices of Interconnection Networks (Dally & Towles)
Game Physics (David Eberly)
Engineering a Compiler (Keith Cooper & Linda Torczon)
Constraint Processing (Rina Dechter)
Design Methods for Reactive Systems : Yourdon, Statemate, and the UML
(R. J. Wieringa)
Temporal Data & the Relational Model (C.J. Date, Darwen & Lorentzos)
Mining the Web: Discovering Knowledge from Hypertext Data (Soumen
Chakrabarti)
Java Made Simple (2nd Ed., McBride)
Optical Networks : A Practical Perspective (2nd Ed., Ramaswami &
Sivarajan)
Usability Engineering : Scenario-Based Development of Human-Computer
Interaction (Rosson & Carroll)
The Designer's Guide to VHDL (2nd Ed., Peter Ashenden)
Transactional Information Systems: Theory, Algorithms, and the
Practice of Concurrency Control and Recovery (Weikum & Vossen)
Parallel Computer Architecture : A Hardware/Software Approach (Culler,
Singh & Gupta)
Advanced Compiler Design and Implementation (Steven Muchnick)
Parallel Programming with MPI (Peter Pacheco)
Distributed Algorithms (Nancy Lynch)
Electrical and Electronic : Principles and Technology (3rd Ed., John
Bird)
Electrical Circuit Theory and Technology (3rd Ed., John Bird)
Electronic Circuits : Fundamentals & Applications (3rd Ed., Mike
Tooley)
A Practical Guide to SysML: The Systems Modeling Language
(Friedenthal, Moore & Steiner)
Multidimensional Signal, Image, and Video Processing and Coding (John
Woods)
Bioelectrical Signal Processing in Cardiac and Neurological
Applications (Leif Sörnmo & Pablo Laguna)
Foundations of Analog and Digital Electronic Circuits (Anant Agarwal &
Jeffrey Lang)
Introduction to Linear Circuit Analysis and Modelling : From DC to RF
(Luis Moura & Izzat Darwazeh)
Embedded Systems Architecture : A Comprehensive Guide for Engineers
and Programmers (Tammy Noergaard)
Bioimpedance and Bioelectricity Basics (2nd Ed., Grimnes & Martinsen)
Simulation Modeling and Analysis with ARENA (Tayfur Altiok & Benjamin
Melamed)
The Visual Story: Creating the Visual Structure of Film, TV and
Digital Media (2nd Ed., Bruce Block)
The Shut Up and Shoot Documentary Guide: A Down & Dirty DV Production
(Anthony Artis)
Portable Video: ENG & EFP (5th Ed., Medoff & Fink)
Voice and Vision: A Creative Approach to Narrative Film and DV
Production (Mick Hurbis-Cherrier)
Writing for Multimedia and the Web: A Practical Guide to Content
Development for Interactive Media (3rd Ed., Timothy Garrand)
Developing and Maintaining a Design-Tech Portfolio: A Guide for
Theatre, Film & TV (Rafael Jaen)
Producing for TV and Video: A Real-World Approach (Cathrine Kellison)
Producing for TV and New Media : A Real-World Approach for Producers
(2nd Ed., Cathrine Kellison)
Placing Shadows: Lighting Techniques for Video Production (3rd Ed.,
Gloman & Tom LeTourneau)
Film Directing Fundamentals: See Your Film Before Shooting (3rd Ed.,
Nicholas Proferes)
Introduction to Media Production : The Path to Digital Media
Production (3rd Ed., Musburger & Kindem)
Introduction to Media Production : The Path to Digital Media
Production (4th Ed., Kindem & Musburger)
Directing the Documentary (5th Ed., Michael Rabiger)
Video Production Handbook (4th Ed., Gerald Millerson & Jim Owens)
Making Media: Foundations of Sound and Image Production (Jan Roberts-
Breslin)
Prepare to Board! Creating Story and Characters for Animation Features
and Shorts (Nancy Beiman)
Light and Lens: Photography in the Digital Age (Robert Hirsch)
The Radio Station : Broadcast, Satellite & Internet (7th Ed., Michael
Keith)
Developing Story Ideas (2nd Ed., Michael Rabiger)
Radio Production Worktext: Studio and Equipment (5th Ed., Reese, Gross
& Gross)
Broadcast News Writing, Reporting, and Producing (4th Ed., Ted White)
Problem Solving and Programming Concepts (7th Ed., Sprankle)
Problem Solving and Programming Concepts (8th Ed., Sprankle & Hubbard)
A Balanced Introduction to Computer Science (2nd Ed., David Reed)
Introduction to Computing and Programming with Java: A Multimedia
Approach (Guzdial & Ericson)
Starting Out with Programming Logic and Design (Tony Gaddis)
Tools For Structured and Object-Oriented Design (7th Ed., Bohl & Rynn)
Programming with Alice and Java (Lewis & DePasquale)
e-Business and e-Commerce How to Program (Harvey M. Deitel, Paul J.
Deitel, Tem R. Nieto)
XML How to Program (Harvey M. Deitel, Paul J. Deitel, Tem R. Nieto,
Ted Lin, Praveen Sadhu)
Python How to Program (Harvey M. Deitel, Paul J. Deitel, Jonathan P.
Liperi Ben Wiedermann)
Perl How to Program (Harvey M. Deitel, Paul J. Deitel, Tem R. Nieto,
D. C. McPhie)
C How to Program (4th Ed., Harvey & Paul Deitel)
C How to Program (5th Ed., Harvey & Paul Deitel)
C++ How to Program (6th Ed., Harvey & Paul Deitel)
Visual Basic.NET How to Program (2nd Ed., Harvey M. Deitel, Paul J.
Deitel, Tem R. Nieto)
Visual C++ 2008 How to Program (2nd Ed., Harvey & Paul Deitel)
Internet & World Wide Web: How to Program (4th Ed., Harvey & Paul
Deitel)
Web Technologies : A Computer Science Perspective (Jeffrey C. Jackson)
Mastering the Internet, XHTML and JavaScript (2nd Ed., Ibrahim Zeid)
Weaving a Website: Programming in HTML, Java Script, Perl and Java
(Susan Anderson-Freed)
Simply C++ : An Application-Driven Tutorial Approach (Harvey & Paul
Deitel)
Visual C# 2005 How to Program (2nd Ed., Harvey & Paul Deitel)
Visual C# 2008 How to Program (3rd Ed., Harvey & Paul Deitel)
Simply C# : An Application-Driven Tutorial Approach (Harvey & Paul
Deitel, Hoey & Yaeger)
Java: An Introduction to Problem Solving and Programming (4th Ed.,
Walter Savitch)
Java: An Introduction to Problem Solving and Programming (5th Ed.,
Savitch & Carrano)
Introduction to Computing and Programming with Java: A Multimedia
Approach (Guzdial & Ericson)
Java How to Program (7th Ed., Harvey & Paul Deitel)
Java For Students (5th Ed., Bell & Parr)
Java, Java, Java, Object-Oriented Problem Solving (3rd Ed., Morelli &
Walde)
Java: An Eventful Approach (Bruce, Danyluk & Murtagh)
Introduction to Java Programming with JBuilder (3rd Ed., Y. Daniel
Liang)
Starting Out with Visual Basic 2008 (4th Ed., Gaddis & Irvine)
Starting Out with Python (Tony Gaddis)
Object-Oriented Programming in Python (Goldwasser & Letscher)
Introduction to MathCAD 11 (Ronald W. Larsen)
Introduction to MathCAD 13 (2nd Ed., Ronald W. Larsen)
MatLAB Programming (David Kuncicky)
Introduction to Maple 8 (David Schwartz)
Introduction to FORTRAN 90 (2nd Ed., Larry R. Nyhoff & Sanford
Leestma)
Fortran 95/2003 Scientists and Engineers (3rd Ed., Stephen J. Chapman)
Introduction to Java (Stephen J. Chapman)
Java Software Solutions for AP Computer Science A (2nd Ed., Lewis,
Loftus & Cocking)
Business Data Networks and Telecommunications (6th Ed., Raymond R.
Panko)
Business Data Networks and Telecommunications (7th Ed., Raymond R.
Panko)
Business Data Communications (Allen Dooley)
Object-Oriented Programming in C++ (4th Ed., Robert Lafore)
C++: Classes and Data Structures (Jeffrey Childs)
Data Structures Outside-In with Java (Sesh Venugopal)
Data Structures and Abstractions with Java (2nd Ed., Frank M. Carrano)
Data Structures and Algorithms in Java (Peter Drake)
Practical Introduction to Data Structures and Algorithm Analysis: C++
Edition (2nd Ed., Clifford A. Shaffer)
Computer Vision: A Modern Approach (David Forsyth & Jean Ponce)
Computer Graphics Using Java 2D and 3D (Hong Zhang & Y. Daniel Liang)
Computer Graphics Using OpenGL (3rd Ed., Francis Hill Jr. & Stephen
Kelley)
Computer Graphics with OpenGL (3rd Ed., Donald Hearn & M. Pauline
Baker)
User-Centered Web Site Development: A Human-Computer Interaction
Approach (McCracken & Wolfe)
Fundamentals of Game Design (Ernest Adams & Andrew Rollings)
Introduction to The Game Industry (Moore & Sward)
Fundamentals of Math and Physics for Game Programmers (Wendy Stahler)
Usability Engineering: Process, Products & Examples (Laura Leventhal &
Julie Barnes)
Web Usability: A User-Centered Design Approach (Jonathan Lazar)
Structured Computer Organization (5th Ed., Andrew S. Tanenbaum)
Assembly Language for Intel-Based Computers (5th Ed., Kip Irvine)
Fundamentals of Multimedia (Ze-Nian Li & Mark Drew)
Digital Media Primer (Yue-Ling Wong)
Essentials for Design Macromedia Director MX 2004 Comprehensive (Tara
Gray)
Modern Database Management (8th Ed., Hoffer, Prescott & Topi)
Modern Database Management (9th Ed., Hoffer, Prescott & Topi)
Database Systems Using Oracle (2nd Ed., Nilesh Shah)
An Advanced Course in Database Systems: Beyond Relational Databases
(Dietrich & Urban)
Data and Text Mining: A Business Applications Approach (Thomas Miller)
Network Management: Concepts and Practice, A Hands-On Approach (J.
Richard Burke)
Computer and Communication Networks (Nader F. Mir)
High Performance TCP/IP Networking (Mahbub Hassan & Raj Jain)
Computer Security : Principles and Practice (William Stallings &
Lawrie Brown)
Computer Forensics: Principles and Practices (Volonino, Anzaldua &
Godwin)
Disaster Recovery: Principles and Practices (April Wells, Charlyne
Walker & Timothy Walker)
Firewalls and VPNs: Principles and Practices (Richard Tibbs & Edward
Oakes)
Network Defense and Countermeasures: Principles and Practices (Chuck
Easttom)
Corporate Computer and Network Security (Raymond Panko)
IP Telephony Using CallManager Express Lab Portfolio (Cheryl Schmidt &
Ernie Friend)
High-Speed Networks and Internets: Performance and Quality of Service
(2nd Ed., William Stallings)
Object-Oriented Modeling and Design with UML (2nd Ed., Michael Blaha &
James Rumbaugh)
Operating Systems : Internals and Design Principles (5th Ed., William
Stallings)
Operating Systems : Internals and Design Principles (6th Ed., William
Stallings)
Distributed Systems: Principles and Paradigms (2nd Ed., Tanenbaum &
Van Steen)
Modern Operating Systems (3rd Ed., Andrew Tanenbaum)
Operating Systems Design and Implementation (3rd Ed., Andrew Tanenbaum
& Albert Woodhull)
UNIX Unbounded: A Beginning Approach (5th Ed., Amir Afzal)
Introduction to Operating Systems and Networks (Ruth Watson)
Operating Systems (3rd Ed., Harvey Deitel, Paul Deitel & David
Choffnes)
Operating Systems Principles (Lubomir Bic & Alan Shaw)
A Practical Guide to Linux: Commands, Editors, and Shell Programming
(Mark Sobell)
A Practical Guide to Red Hat Linux : Fedora Core and Red Hat
Enterprise Linux (2nd Ed., Mark Sobell)
A Practical Guide to Red Hat Linux : Fedora Core and Red Hat
Enterprise Linux (3rd Ed., Mark Sobell)
A Practical Guide to Fedora and Red Hat Enterprise Linux: College
Edition (Mark Sobell)
A Practical Guide to Ubuntu Linux (Mark Sobell)
Automata, Computability and Complexity: Theory and Applications
(Elaine Rich)
Modern Digital Electronics (R.P. Jain)
Linear Systems and Signals (B.P. Lathi)
Modern Digital and Analog Communications Systems (3rd Ed., B. P.
Lathi)
Introduction to Digital Systems (Milo D. Ercegovac, Lang & Moreno)
Embedded Systems: Architechture, Programming and Design (Raj Kamal)
Modern Power System Analysis (D. P. Kothari & I. J. Nagrath)
Basic Electrical Engineering (2nd Ed., D.P. Kothari, I.J. Nagrath)
Electric Machines (3rd Ed., D.P. Kothari, I.J. Nagrath)
Circuits and Networks (A. Sudhakar & S. Palli Shyammohan)
Electrical and Electronic Technology (9th Ed., Edward Hughes, John
Hiley, Keith Brown & Ian McKenzie-Smith)
Electrical and Electronic Technology (10th Ed., Edward Hughes, John
Hiley, Keith Brown & Ian McKenzie-Smith)
Electric Motors and Drives : Fundamentals, Types and Applications (3rd
Ed., Austin Hughes)
Modern Processor Design: Fundamentals of Superscalar Processors (John
P. Shen)
Computer Networks : Principles, Technologies and Protocols for Network
Design (N. Olifer & V. Olifer)
Computer Networking: Internet Protocols in Action (Jeanna Matthews)
Computer Organization (5th Ed., Hamacher et al.)
CMOS Digital Integrated Circuits : Analysis and Design (3rd Ed., Sung-
Mo Kang & Yusuf Leblebici)
Introduction to Logic Design (1st Ed., Alan B Marcovitz)
Introduction to Logic Design (2nd Ed., Alan B Marcovitz)
Introduction to Logic Design (3rd Ed., Alan B Marcovitz)
Introduction to Logic and Computer Design (Alan B Marcovitz)
Digital Principles and Design (Donald D. Givone)
Programmable Logic Controllers (3rd Ed., Frank Petruzella)
Antenna Theory and Design (2nd Ed., Stutzman & Thiele)
Antennas for All Applications (3rd Ed., John Kraus & Ronald Marhefka)
Principles of Neurocomputing for Science and Engineering (Fredric M.
Ham & Ivica Kostanic)
Introduction to Algorithms (2nd Ed., Cormen, et al.)
Algorithms (Dasgupta, et al.)
Applied Operating Systems Concepts (Silberschatz, Galvin & Gagne)
Operating System Concepts (6th Ed., Silberschatz, Galvin & Gagne)
Operating System Concepts (7th Ed., Silberschatz, Galvin & Gagne)
Operating System Concepts (8th Ed., Silberschatz, Galvin & Gagne)
Operating Systems Concepts with Java (6th Ed., Silberschatz, Galvin &
Gagne)
Operating System Concepts with Java (7th Ed., Silberschatz, Galvin &
Gagne)
C++ Program Design (3rd Ed., Cohoon & Davidson)
Java: Program Design 5.0 (Cohoon & Davidson)
Programming in C++: Lessons and Applications (Timothy B. D'Orazio)
Applied C: An Introduction and More (Alice Fischer)
Programming Languages : Principles and Paradigms (1st Ed., Allen
Tucker & Robert Noonan)
Programming Languages : Principles and Paradigms (2nd Ed., Allen
Tucker & Robert Noonan)
Introduction to Parallel Computing (2nd Ed., Grama, Karypis, Kumar &
Gupta)
Parallel Programming in C with MPI and Open MP (Michael J Quinn)
Data Communications and Network Security (Houston H. Carr & Charles
Snyder)
Data Communications and Networks (David Miller)
Database Design, Application, Development & Administration (2nd Ed.,
Michael V. Mannino)
Database Design, Application, Development & Administration (3rd Ed.,
Michael V. Mannino)
Management Information Systems (3rd Ed., Post & Anderson)
Management Information Systems (4th Ed., Post & Anderson)
Database Management Systems (3rd Ed. Post)
Management Information Systems (9th Ed., James A. O'Brien, George
Marakas)
Introduction to Systems Analysis and Design (Whitten & Bentley)
Systems Analysis & Design: An Active Approach (2nd Ed., Marakas)
An Introduction to Object-Oriented Programming with Java (4th Ed., C.
Thomas Wu - Otani)
An Introduction to Object-Oriented Programming with Java (5th Ed., C.
Thomas Wu - Otani)
A Comprehensive Introduction to Object-Oriented Programming With Java
(C. Thomas Wu)
Data Structures and the Java Collections Framework (1st Ed., William
J. Collins)
Data Structures and the Java Collections Framework (2nd Ed., William
J. Collins)
Data Structures and the Standard Template Library (William J. Collins)
Database System Concepts (4th Ed. Silberschatz)
Database System Concepts (5th Ed. Silberschatz)
Database Management Systems (3rd Ed., Ramakrishnan & Gehrke)
Fundamentals of Network Security (Eric Maiwald)
Computing Concepts (1st Ed., Haag, et al.)
Computing Concepts (2nd Ed., Haag et al.)
Microsoft Office 2003 (Haag et al.)
Advanced Programming Using Visual Basic .NET (2nd Ed., Julia Case
Bradley & Anita C. Millspaugh)
Advanced Programming Using Visual Basic 2005 (3rd Ed., Julia Case
Bradley & Anita C. Millspaugh)
Programming with Java (Julia Case Bradley & Anita C. Millspaugh)
Programming in C#.Net (1st Ed., Julia Case Bradley & Anita C.
Millspaugh)
Programming in Visual C# 2005 (2nd Ed., Julia Case Bradley & Anita C.
Millspaugh)
Learning Programming Using Visual Basic.Net (Bill Burrows & Joe
Lanford)
Programming in Visual Basic.NET: Visual Basic.NET 2005 (6th Ed., Julia
Case Bradley & Anita C. Millspaugh)
Programming in Visual Basic .Net: 2003 Update Edition (5th Ed., Julia
Case Bradley & Anita C. Millspaugh)
Survey of Operating Systems (2nd Ed., Jane Holcombe & Charles
Holcombe)
Principles of Voice and Data Communications (Regis J. Bates & Marcus
Bates)
Mike Meyers' Network+ Guide To Managing and Troubleshooting Networks
(Michael Meyers)
Introduction to Windows Server 2003 (Eric Ecklund)
Programming The Web: An Introduction (Barrie Sosinsky & Valda Hilley)
Programming The Web Using XML (Ellen Pearlman & Eileen Mullin)
Internet Marketing: Building Advantage in a Networked Economy (2nd
Ed., Rafi Mohammed et al.)
Internet Technologies at Work (Fred T. Hofstetter)
Internet Literacy (4th Ed., Fred T. Hofstetter)
Software Engineering: A Practitioner's Approach (5th Ed., Roger S.
Pressman)
Software Engineering: A Practitioner's Approach (6th Ed., Roger S.
Pressman)
Web Engineering: A Practioner's Approach (1st Ed., Roger S. Pressman &
David Lowe)
Object-Oriented Software Engineering (Stephen Schach)
Object-Oriented and Classical Software Engineering (5th Ed., Steve
Schach)
Object-Oriented and Classical Software Engineering (6th Ed., Steve
Schach)
Object-Oriented and Classical Software Engineering (7th Ed., Steve
Schach)
Introduction to Object-Oriented Analysis and Design (Steve Schach)
Communication Networks (2nd Ed., Alberto Leon-Garcia & Indra
Widjaja)
Fundamentals of Digital Logic with Verilog Design (1st Ed., Stephen
Brown & Zvonko Vranesic)
Fundamentals of Digital Logic with Verilog Design (2nd Ed., Stephen
Brown & Zvonko Vranesic)
Continuous and Discrete Control Systems (John Dorsey)
Engineering Circuit Analysis (6th Ed., William H. Hayt, Jack Kemmerly
& Steven M. Durbin)
Engineering Circuit Analysis (7th Ed., William H. Hayt, Jack Kemmerly
& Steven M. Durbin)
Engineering Electromagnetics (7th Ed., William H. Hayt & John A. Buck)
Principles of Electronic Materials and Devices (2nd Ed, Safa O. Kasap)
Principles of Electronic Materials and Devices (3rd Ed, Safa O. Kasap)
Programming in Haskell (Graham Hutton)
Probability and Random Processes With Applications to Signal
Processing and Communications (Miller & Childers)
Logic in Computer Science: Modelling and Reasoning about Systems (2nd
Ed., Michael Huth & Mark Ryan)
Introduction to Distributed Algorithms (2nd., Gerard Tel)
Information Theory, Inference and Learning Algorithms (David J. C.
MacKay)
Digital Systems Engineering (William J. Dally & John W. Poulton)
Concepts in Programming Languages (by John C. Mitchell)
Simulation Modeling and Analysis (3rd Ed., Averill Law & David
Kealton)
Simulation Modeling and Analysis with Expertfit Software (4th Ed.,
Averill Law)
System Modeling and Analysis: Foundations of System Performance
Evaluation (Hisashi Kobayashi & Brian Mark)
Wireless Communications (Andrea Goldsmith)
Testing of Digital Systems (N. K. Jha & S. Gupta)
Space-Time Coding (Hamid Jafarkhani)
Space-Time Block Coding for Wireless Communications (Erik G. Larsson &
Petre Stoica)
Smart Electronic Materials: Fundamentals and Applications (Jasprit
Singh)
Radio-Frequency Electronics: Circuits and Applications (Jon B. Hagen)
Photonic Devices (Jia-ming Liu)
Networking Wireless Sensors (Bhaskar Krishnamachari)
Mobile Wireless Communications (Mischa Schwartz)
Introduction to Color Imaging Science (Hsien-Che Lee)
Fundamentals of Wireless Communication (David Tse & Pramod Viswanath)
Fundamentals of Modern VLSI Devices (Yuan Taur & Tak H. Ning)
Electronic and Optoelectronic Properties of Semiconductor Structures
(Jasprit Singh)
An Introduction to Statistical Signal Processing (Robert M. Gray)
An Introduction to Radio Frequency Engineering (Christopher Coleman)
Algebraic Codes for Data Transmission (Richard E. Blahut)
Fundamentals of Solid State Electronics (C.T. Sah)
Fundamentals of Solid State Engineering (2nd Ed., Manijeh Razeghi)
Robot Modeling and Control (Spong, Hutchinson & Vidyasagar)
Theory of Applied Robotics: Kinematics, Dynamics and Control (Reza N.
Jazar)
Control of Robot Manipulators in Joint Space (R. Kelly, V. Santibáñez,
A. Loría)
Modelling and Control of Robot Manipulators (2nd Ed., Lorenzo
Sciavicco, Bruno Siciliano)
Robotics: Modelling, Planning and Control (Bruno Siciliano, Lorenzo
Sciavicco, Luigi Villani & Giuseppe Oriolo)
Fundamentals of Semiconductor Fabrication (Gary S. May, Simon M. Sze)
Semiconductor Devices: Physics and Technology (2nd Ed, Simon M. Sze)
Physics of Semiconductor Devices (3rd Ed., Simon M. Sze, Kwok K. Ng)
Electric Machinery (6th Ed., Fitzgerald)
Electric Machinery Fundamentals (4th Ed., Chapman)
Electric Machinery and Power System Fundamentals (Chapman)
Local Area Networks (2nd Ed., Keiser)
Signals and Systems: Analysis of Signals Through Linear Systems (1st
Ed., M.J. Roberts)
Fundamentals of Signals and Systems (M.J. Roberts)
Introduction to Signals and Systems (Lindner)
Semiconductor Physics and Devices (3rd Ed., Donald Neamen)
An Introduction to Semiconductor Devices (Donald Neamen)
Microelectronic Circuit Analysis and Design (3rd Ed., Donald Neamen)
Electronic Circuit Analysis and Design (2nd Ed., Donald Neamen)
Design for Electrical and Computer Engineers (1st Ed., Ralph Ford &
Chris Coulston)
Fundamentals of Modeling and Analyzing Engineering Systems (Cha,
Rosenberg, Dym)
Principles of Linear Systems (Philip E. Sarachik)
Power Systems Harmonics: Fundamentals, Analysis and Filter Design
(George J. Wakileh)
Principles of Adaptive Filters and Self-learning Systems (Anthony
Zaknich)
Algebraic Methods for Nonlinear Control Systems (2nd Ed., Conte, Moog
& Perdon)
Modern Control Engineering - Problems B (3rd Ed. K. Ogata)
Modern Control Engineering (4th Ed. K. Ogata)
LabVIEW 8 Student Edition (Bishop)
A Linear Systems Primer (Panos J. Antsaklis & Anthony N. Michel)
Feedback Control of Dynamic Systems (4th Ed., Gene Franklin, J.D.
Powell, Abbas Emami-Naeini)
Feedback Control of Dynamic Systems (5th Ed., Gene Franklin, J.D.
Powell, Abbas Emami-Naeini)
Predictive Control with Constraints (Jan Maciejowski)
Computer Numerical Control: Operation and Programming (3rd Ed.,
Stenerson & Curran)
Engineering Problem Solving with C (3rd Ed., Etter)
Engineering Problem Solving with C++ (2nd Ed., Etter)
Process Control Instrumentation Technology (8th Ed., Johnson)
Electrical Power and Controls (2nd Ed., Skvarenina & DeWitt)
Electronics and Computer Math (8th Ed., Deem & Zannini)
Circuits, Signals, and Systems for Bioengineers: A MATLAB-Based
Introduction (John Semmlow)
VLSI Test Principles and Architectures: Design for Testability (Laung-
Terng Wang, Cheng-Wen Wu & Xiaoqing Wen)
Mechatronics: Principles and Applications (Godfrey Onwubolu)
Machine Vision: Theory, Algorithms, Practicalities (3rd Ed., E. R.
Davies)
Essential Java for Scientists and Engineers (Brian D. Hahn & Katherine
M. Malan)
Guide to Microsoft Excel 2002 for Scientists and Engineers (3rd Ed.,
Bernard V. Liengme)
10-Key Touch Key: Developing Speed and Accuracy (Burton)
Introduction to C++ Programming, Brief Version (Y. Daniel Liang)
Introduction to C++ Programming, Comprehensive (Y. Daniel Liang)
C++ for Business Programmers (2nd Ed., John C. Molluzzo)
Introduction to Java Programming-Comprehensive Version (6th Ed.,
Liang)
Introduction to Java Programming-Comprehensive Version (7th Ed.,
Liang)
Introduction to Java Programming: Fundamentals First (6th Ed., Y.
Daniel Liang)
Objects First With Java: A Practical Introduction Using BlueJ (3rd
Ed., Barnes & Kolling)
Simply Java Programming : An Application-Driven™ Tutorial Approach
(Deitel)
Java: An Introduction to Computing (Joel Adams, Larry R. Nyhoff &
Jeffrey Nyhoff)
Advanced Java™ 2 Platform How to Program (Deitel & Santry)
SQL for SQL Server (Bijoy Bordoloi & Douglas B. Bock)
An Introduction to Programming Using Visual Basic 2005 (6th Ed.,
Schneider)
An Introduction to Programming Using Visual Basic 2008 (7th Ed.,
Schneider)
Simply Visual Basic .NET (Harvey M. Deitel, Paul J. Deitel, Tem R.
Nieto)
Simply Visual Basic 2005 (2nd Ed., Harvey & Paul Deitel & Associates)
Simply Visual Basic 2008 (3rd Ed., Harvey & Paul Deitel & Associates)
Visual Basic 2005 How to Program (3rd Ed., Deitel & Associates)
Visual Basic 2008 How to Program (4th Ed., Deitel & Associates)
An Introduction to Programming with Visual Basic 6.0 (4th Ed.,
Schneider)
Visual Basic.Net Programming (2nd Ed., Jeffrey Tsay)
Simply Visual Basic .NET (Harvey & Paul Deitel & Nieto)
Mechatronics (Sabri Cetinkunt)
Introduction to Linear Programming (Leonid N. Vaserstein)
Introductory Circuit Analysis (11th Ed., Robert L. Boylestad)
Principles of Electric Circuits : Conventional Current Version (8th
Ed., Thomas Floyd)
Principles of Electric Circuits : Conventional Current Version (9th
Ed., Thomas Floyd)
Principles of Electric Circuits : Electron Flow Version (8th Ed.,
Thomas L. Floyd)
Principles of Electric Circuits : Electron Flow Version (9th Ed.,
Thomas L. Floyd)
Contemporary Electric Circuits : Insights and Analysis (2nd ed.,
Strangeway, Petersen, Gassert & Lokken)
Introductory Electronic Devices and Circuits : Electron Flow Version
(7th Ed., Paynter)
Introductory Electronic Devices and Circuits : Conventional Flow
Version (7th Ed., Paynter)
Electronics Technology Fundamentals : Conventional Flow (2nd Ed.,
Robert T. Paynter & Toby Boydell)
Electronics Technology Fundamentals : Conventional Flow (3rd Ed.,
Robert T. Paynter & Toby Boydell)
Electronics Technology Fundamentals : Electron Flow (2nd Ed., Robert
T. Paynter, Toby Boydell)
Electronics Technology Fundamentals : Electron Flow (3rd Ed., Robert
T. Paynter, Toby Boydell)
Introductory DC/AC Circuits (6th Ed., Nigel P. Cook)
Introductory DC/AC Electronics (6th Ed., Nigel P. Cook)
Electronic Devices: Conventional Current Version (7th Ed., Floyd)
Electronic Devices: Conventional Current Version (8th Ed., Floyd)
Electronic Devices: Electron Flow Version (7th, Floyd)
Electronic Devices: Electron Flow Version (8th, Floyd)
Electronics Fundamentals: Circuits, Devices and Application...(message truncated)